Abassermann Posted January 6, 2018 Share Posted January 6, 2018 HI all, Since 2 days I try to figure out what cables to buy in order to connect My Corsair RM1000i PSU to 2 x 1070 TI GPUs on the GPU i have 8+6 pins/entry Side note: I already have a Titan x installed with same 8+6 intro the gpu and in the PSU 8 pin. From my logic I need the same cables? 8 pin (that goes into PSU) and ends with 8 pins + 6 pins (14 in total) I was not able to find such a cable anywere. The one that is already connected to the TITANX and RM1000i says only TYPE 4 on it. also all the endings have to be male pins right? I mad a picture for rhe right cable my other card is using, please see attachment. Any help/advice is much appreciated. Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted January 6, 2018 Corsair Employee Share Posted January 6, 2018 Your PSU came with four cables, each with two PCIe connectors on them. Titan X needs one 6-pin and one 8-pin (use 6+2-pin). That's one cable. The new cards need the same. That's two more cables. What happened to your other three cables? Link to comment Share on other sites More sharing options...
Abassermann Posted January 6, 2018 Author Share Posted January 6, 2018 thatțs the problem. when I ordered my rig I did it with a gaming company and they sent me no additional cables, just the rig with the titan x connected, which is connected with the cable I added in the attachment. Now I bought 2 more cards, 1070 TI and since it also has 8 + 6 holes in it as the titan x, I donțt know what cables I should buy in order to work with the psu and with the 2 new cards. Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted January 6, 2018 Corsair Employee Share Posted January 6, 2018 Ohhhhhhh..... You didn't build it and they didn't give you the extra cables. That sucks. You should contact them and tell them you want your cables. Alternatively, you can order this: http://www.corsair.com/en-us/type-4-sleeved-black-pci-e-cable-with-pigtail-connector-and-capacitors-for-type-4-psu Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.