The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Keyboards and Mice

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 06-27-2015, 12:41 AM
Lucario Lucario is offline
Registered User
 
Join Date: Apr 2013
Posts: 29
POST ID # = 786964
Lucario Reputation: 10
Default Problem with middle click? Solution inside.

Since when I bought the original M65, I've been using it for long time in my life and I liked it.

But the middle click began to become less responsive. I've had to press it harder to actually register the middle click.

Then I was going to RMA it, but decided to have it on my secondary computer (HTPC) and buy M65 RGB for my main PC.

A while later my M65 RGB has the exact same problem with middle click not registering. I was disappointed that I might have to RMA it. I was frustrated trying to think of a better and quicker solution.

I can recall similar problem with other old technologies which the buttons require harder press to register, or sometime won't register at all. The culprit is usually dust or other dirt between the button conductors and had to be wiped to make the button work like a charm.

While it's quite impossible to disassemble my M65 down to middle click's conductors, I rotated M65 RGB to right and mashed the middle button as fast as I can as if there is dirt beneath it and pretending I was trying to shake it out.

The middle click now works like a charm.

I was excited and thought I could do the same with my older M65, and I've done it and it now works like a charm too!

I was amazed how simple it can be to get them working without having to press harder.

You can try it for yourself if you have the same problem with middle click not registering without having to press it harder. Though be warned, it may wear down M65 mouse faster.

Last edited by Lucario; 06-27-2015 at 12:46 AM.
Reply With Quote


  #2  
Old 01-06-2016, 11:16 PM
dsemblano dsemblano is offline
Registered User
 
Join Date: Jan 2016
Posts: 1
POST ID # = 829646
dsemblano Reputation: 10
Default It works!

Dude, you deserve a beer, a big THANK YOU! I did as you instructed, rotate to the right side and a few clicks was sufficient!

I have a M65 mouse and for three months I was having this same problem and after a while the middle button didn't work anymore, even putting a big pressure.

Thank you!
Reply With Quote


  #3  
Old 01-07-2016, 12:46 AM
Inheritance's Avatar
Inheritance Inheritance is offline
βetα Nayn Cat
 
Join Date: Jul 2013
Location: Somewhere in Texas
Posts: 5,290
POST ID # = 829664
Inheritance Reputation: 41
Default

@Lucario you had to do this with the new M65 RGB too?
__________________
Colors of the RAINBOW shine so bright!
USER IS NOT A CORSAIR EMPLOYEE
Come Join My Discord =(^.^)= [iCUE Guide]
Corsair USER Forums is NOT Corsair Tech Support
Reply With Quote


  #4  
Old 01-25-2016, 09:57 PM
Lucario Lucario is offline
Registered User
 
Join Date: Apr 2013
Posts: 29
POST ID # = 833263
Lucario Reputation: 10
Default

Quote:
Originally Posted by zheren159 View Post
@Lucario you had to do this with the new M65 RGB too?
Yes. I've had this problem with M65 RGB along with my older, regular M65.
Reply With Quote


  #5  
Old 03-09-2016, 11:10 AM
Jack_Straw Jack_Straw is offline
Registered User
Jack_Straw's PC Specs
 
Join Date: Jul 2015
Location: Oaqkhurst, CA
Posts: 7
POST ID # = 841453
Jack_Straw Reputation: 10
Default

Owe you a beer! Worked for me too!
Reply With Quote


  #6  
Old 12-19-2017, 09:20 AM
quanzi quanzi is offline
Registered User
 
Join Date: Dec 2017
Posts: 1
POST ID # = 931147
quanzi Reputation: 10
Default

Well, I've been having problem with my Scimitar RGB's middle clicks too and your solution completely solved it.

Had to register just to say thanks. Own you a beer too I guess.
Reply With Quote


  #7  
Old 03-10-2018, 01:11 PM
TensaZ TensaZ is offline
Registered User
 
Join Date: Mar 2018
Posts: 1
POST ID # = 944185
TensaZ Reputation: 10
Default

I too had to register and give thanks for such an amazing, yet simple solution. Thank you very much.

Put a beer on my tab as well.
Reply With Quote


  #8  
Old 03-20-2018, 11:32 PM
kazylax kazylax is offline
Registered User
 
Join Date: Mar 2018
Posts: 1
POST ID # = 945752
kazylax Reputation: 10
Default

I also registered to say I owe you a beer, I was panicking already before coming here. Thank you so much!
Reply With Quote


  #9  
Old 04-20-2018, 03:41 PM
MinecraftBoxGuy MinecraftBoxGuy is offline
Registered User
 
Join Date: Dec 2016
Posts: 2
POST ID # = 951296
MinecraftBoxGuy Reputation: 10
Default

Thank you so much!
Reply With Quote


  #10  
Old 04-24-2018, 02:41 PM
Corsair Mint Corsair Mint is offline
Corsair Employee
 
Join Date: Apr 2016
Posts: 784
POST ID # = 951849
Corsair Mint Reputation: 31
Default

Besides smashing on the wheel, you can also try compressed air, though it might not remove as much material stuck in there if it's really, really stuck.
Reply With Quote


  #11  
Old 04-25-2018, 07:26 AM
PEneoark PEneoark is offline
Registered User
PEneoark's PC Specs
 
Join Date: Feb 2018
Location: Holley, NY
Posts: 27
POST ID # = 951928
PEneoark Reputation: 10
Default

I had to do the same thing with my old Razer Adder.
Reply With Quote


  #12  
Old 04-25-2018, 04:02 PM
CodilX CodilX is offline
Registered User
 
Join Date: Jan 2015
Posts: 66
POST ID # = 952023
CodilX Reputation: 10
Default

I'd be careful with that..

I've had this mouse for a while and had a bunch of issues with the middle click. The biggest problem is the plastic "fingers" sticking out of the scroll wheel that are holding it in place - they're very fragile. I did the same smacking stuff and all it did was eventually snap one of the "fingers" off the scroll wheel.

Now the scroll wheel is only supported by one side, lucky for me it's the side that allows me to use the scroll wheel, but the middle click functionality is gone. I tried to glue the piece back, but aligning it meant I had to sand a bit off - and it eventually resulted in the thing breaking again in a way that was just not fixable.

Unfortunately Corsair don't sell a replacement scroll wheel, so just be extra careful with what you do to it.
Reply With Quote


  #13  
Old 01-19-2019, 01:37 PM
Renderhound Renderhound is offline
Registered User
 
Join Date: Jan 2019
Posts: 3
POST ID # = 990511
Renderhound Reputation: 10
Default 2019 woot!

Wow still happening here. Thanks so much!!
Reply With Quote


  #14  
Old 01-20-2019, 05:17 AM
madcap123 madcap123 is offline
Registered User
 
Join Date: Mar 2016
Posts: 35
POST ID # = 990611
madcap123 Reputation: 10
Default

They used a dirt cheap switch for the middle button, so no doubt it will fail again. I ended up adapting to never using middle button after it became unusable. I'm still not using it even on my new mouse (not Corsair) out of habit.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.