TweakingMonk Posted February 11, 2005 Share Posted February 11, 2005 I just upgraded to some corsair ram, CMX512-3200C2. 512x2 I was running on noname 512 before and games and such ran fine, now i get some choppiness and strange freezes... wondering if someone could help out and give me some suggestions. here is my info; MB: Abit AG8 Processor: Intel Prescott 3.00GHz Not too sure on what youll need but here it goes CPU Ratio: 15.0X Ext Clock: 204 MHz PCI Clock: 33.33 MHz VCore: 1.3875V DDRV: 2.70V NBV: 1.50V BIOS INFORMATION Phoenix Technologies, LTD Version 6.00 PG DoM: 9/22/2004 I really dont know what else you guys will need, I'll check daily. Thanks in advance. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 11, 2005 Corsair Employee Share Posted February 11, 2005 Please check for the latest bios and then load setup defaults and set these settings manually and test the modules one at a time with http://www.memtest.org. Dim Voltage to +2.7 Volts: CAS Latency CL=2.5 Ras# to CAS# delay tRCD 3 Min Ras# Active Time tRAS 6 Row Precharge Time tRP 3 Then test the system with http://www.memtest.org and make sure it's stable! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.