Tullagh Posted November 15, 2018 Share Posted November 15, 2018 Hello! I apologize in advance for this noob question. I have a new PC with H110i. If I'm reading it correctly, Corsair Link's default configuration has the radiator fans responding to pump temperature. Should I change that? I've noticed that the pump temperature never reaches 40C even when the CPU is at 75C after an hour of Prime95. Should the radiator fans respond to CPU temperature instead? Thanks! Link to comment Share on other sites More sharing options...
Zotty Posted November 15, 2018 Share Posted November 15, 2018 Hi buddy No. leave pump on coolant temp dude,, this will insure correct operation regardless of software Controlling via cpu is ok for heatsink coolers where the fans have direct impact on temps... it's not so with liquid cooling.. you need to control liquid temps in order to control cpu temps. If you set it to cpu, because you temps can be iratic it can make your fans ramp up and down often... like very very often.. Link to comment Share on other sites More sharing options...
Tullagh Posted November 15, 2018 Author Share Posted November 15, 2018 Excellent. Thanks! Link to comment Share on other sites More sharing options...
DevBiker Posted November 15, 2018 Share Posted November 15, 2018 Take a look at the Liquid Cooler FAQ linked in my signature ... this is mentioned in there. And towards the end of section A is a discussion on how to effectively create a custom fan curve. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.