Jump to content
Corsair Community

Cmt16gx3m4x2133c9 (Dominator GT 16GB)


SolidCrew

Recommended Posts

Hi,

 

OCCT is throwing up errors with the 16gb kit.

 

Wondered if I could get some help please?

 

I've increased the Vcore to 1.4v and LLC is at 75%.

Also tried 2T and 1T.

Ram timings are stock. And DRAM I've increased to 1.6V as I'd tried 1.5v previously.

 

Could this be because of the extra two sticks (4 in total) ?

Motherboard: Asus Maximus IV Extreme (latest BIOS)

CHIP: 2600K @ 4.6Mhz (on water)

Corsair AX1200W PSU

 

Vcore: 1.4v

VCCIO: 1.08125v

CPU PLL: 1.71250v

VDIM: 1.6v

 

Here's are some recent OCCT shots...

 

 

http://img688.imageshack.us/img688/8391/2012050321h3833v.png

http://img593.imageshack.us/img593/319/2012050321h385v.png

http://img152.imageshack.us/img152/7877/2012050321h3812v.png

http://img37.imageshack.us/img37/6121/2012050321h38avcc.png

http://img528.imageshack.us/img528/1811/2012050321h38core0.png

http://img171.imageshack.us/img171/6012/2012050321h38core1.png

http://img84.imageshack.us/img84/9827/2012050321h38core2.png

http://img98.imageshack.us/img98/581/2012050321h38core3.png

http://img526.imageshack.us/img526/5655/2012050321h38cpu2.png

http://img685.imageshack.us/img685/7374/2012050321h38cpupll.png

http://img40.imageshack.us/img40/7294/2012050321h38cpusocket.png

http://img692.imageshack.us/img692/6088/2012050321h38cpuusage.png

http://img805.imageshack.us/img805/5728/2012050321h38cpuvcore.png

http://img585.imageshack.us/img585/2227/2012050321h38cpu.png

http://img713.imageshack.us/img713/5404/2012050321h38currentvol.png

http://img692.imageshack.us/img692/4829/2012050321h38dram.png

http://img850.imageshack.us/img850/8155/2012050321h38memoryused.png

http://img824.imageshack.us/img824/9008/2012050321h38pchpll.png

http://img546.imageshack.us/img546/4557/2012050321h38pch.png

http://img72.imageshack.us/img72/4120/2012050321h38vccio.png

http://img215.imageshack.us/img215/5661/2012050321h38vccsa.png

Additional Comment:

 

Also Run a Memtest over night. No errors.

Link to comment
Share on other sites

Solid Crew, you could try a bump in VCCSA voltage. That should be your memory controller voltage.

 

If a bump in memory controller voltage does not help you'll have to sacrifice one overclock for another or try to find a sweet spot somewhere in between. Try 1866mhz with your current overclock, see what that gets ya. I think your asking too much of your RAM and CPU, but thats just my opinion.:p:

 

Good Luck!

Link to comment
Share on other sites

Solid Crew, you could try a bump in VCCSA voltage. That should be your memory controller voltage.

 

If a bump in memory controller voltage does not help you'll have to sacrifice one overclock for another or try to find a sweet spot somewhere in between. Try 1866mhz with your current overclock, see what that gets ya. I think your asking too much of your RAM and CPU, but thats just my opinion.:p:

 

Good Luck!

 

Thanks for your advice.

 

Do you have any recommendations to max voltages to try with VCCSA?

I have the memory controller on Auto currently.

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...