NEWPCPROBLEM Posted August 2, 2016 Share Posted August 2, 2016 Hey Freunde ich habe mir das Rm1000X gekauft und hätte halt gern dafür ein roten 24 Pin Mainboard Stecker.. aber bis jetzt keinen richtigen gefunden der passt ich hoffe ihr könnt mir helfen. hab das Gefühl für dieses Netzteil gibt es Gar kein red Pin ..... :( Link to comment Share on other sites More sharing options...
NEWPCPROBLEM Posted August 2, 2016 Author Share Posted August 2, 2016 ----(atx)---- Link to comment Share on other sites More sharing options...
derMichi Posted August 2, 2016 Share Posted August 2, 2016 meinst du sowas?du meinst ein gesleevtes kabel....falls ja nur eine verlängerung oder sollte es komplett sein Link to comment Share on other sites More sharing options...
NEWPCPROBLEM Posted August 2, 2016 Author Share Posted August 2, 2016 ja genau^^ nur für das rm 1000 x Link to comment Share on other sites More sharing options...
derMichi Posted August 2, 2016 Share Posted August 2, 2016 ah ja das kannste kriegen,wenn es nur das eine sein soll dann mach das über den cablemod konfigurator https://store.cablemod.com/configurator/ solltest du komplett alles gesleevt haben wollen schau im store nach Link to comment Share on other sites More sharing options...
NEWPCPROBLEM Posted August 2, 2016 Author Share Posted August 2, 2016 Individually Sleeved ATX Cable 24pin Type 3 (Generation 2), RED CP-8920057 das hab ich hier liegen passt nicht ... Link to comment Share on other sites More sharing options...
derMichi Posted August 2, 2016 Share Posted August 2, 2016 von cablemod? Link to comment Share on other sites More sharing options...
NEWPCPROBLEM Posted August 2, 2016 Author Share Posted August 2, 2016 wow nice thanks a lot :) Link to comment Share on other sites More sharing options...
derMichi Posted August 2, 2016 Share Posted August 2, 2016 gerne doch Link to comment Share on other sites More sharing options...
Corsair Employee Bluebeard Posted August 4, 2016 Corsair Employee Share Posted August 4, 2016 Du kannst das Kabel CP-8920057 nutzen, musst aber die Haltenase vom Stecker entfernen. 4 Pins bleiben unbelegt dabei, was ein wenig der Spannungsstabilität zu Lasten fällt. Ansonsten zurück mit dem Kabel und das von Cablemods holen, welches alle Pins nutzt. Modifikationen auf eigene Gefahr! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.