Athlon Posted July 27, 2009 Share Posted July 27, 2009 Hi guys, i just been upgrading my pc, with some new stuff, today the people at the store sold me 2 kits of memory of which they were convinced it would work with my mainboard... Ok, so i insert the first kit, no problem, then 1 module of the second kit, still fine, then the 2nd module of the 2nd kit, and my system fails... it gives me a continues beep for about 3 seconds, then seems to be trying to reboot the system... I've been over the forum, have sought contact with gigabyte, tried to raise the voltage of the north-bridge all seems to fail whatsoever. When i take the out the 4th module, it's all fine again. EDIT: PS. my Bios version is F2 i updated it yesterday to have my phemon working on the AM2+ board Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted July 28, 2009 Corsair Employee Share Posted July 28, 2009 With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.