simstarz Posted July 17, 2014 Share Posted July 17, 2014 i bought a brand new h80i from ncix last christmas evrything was fine then 2 days ago my psu started to overheating 80celcius (normaly40) i tried to change the thermal paste. reinstall the h80i but no change. the corsair link show my pump running at 2200rpm but i notice only one hose is hot. the radiator and the other hose are cold what i did next is put the stock intel heatsink and now my temp are back to normal(without oc) rma time?:sigh!: Link to comment Share on other sites More sharing options...
LangZone Posted July 17, 2014 Share Posted July 17, 2014 It could be an air pocket blocking the coolant. Try either taking the cooler out and shaking it really hard or while its running very carefully shake the rad. If that fails then RMA. Link to comment Share on other sites More sharing options...
snapper69 Posted July 17, 2014 Share Posted July 17, 2014 Take the rad off and tilt it while the system is running, if there is an air bubble that may move it. If you shake the rad that will cause lots of bubbles. Link to comment Share on other sites More sharing options...
simstarz Posted July 17, 2014 Author Share Posted July 17, 2014 i already try to tilt it ...... :( Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.