thatgreg Posted March 16, 2019 Share Posted March 16, 2019 What are the extra cables that are connected to the h150i pro? I understand the mini usb cable for RGB that connects to an internal usb port, but what about the 1 sole 3 pin cable, and the 3 4pin cables attached to each other ?? where do i connect these? Link to comment Share on other sites More sharing options...
c-attack Posted March 16, 2019 Share Posted March 16, 2019 Those are your fan headers (3 x 4 pin) and the single 3 pin (really 2 wire) goes to the CPU FAN header to prevent the boot error and report a pump speed to the BIOS. Both fan speed and pump speed will be through the iCUE application, not the BIOS. Link to comment Share on other sites More sharing options...
thatgreg Posted March 16, 2019 Author Share Posted March 16, 2019 Those are your fan headers (3 x 4 pin) and the single 3 pin (really 2 wire) goes to the CPU FAN header to prevent the boot error and report a pump speed to the BIOS. Both fan speed and pump speed will be through the iCUE application, not the BIOS. where would that plug into? Link to comment Share on other sites More sharing options...
DevBiker Posted March 16, 2019 Share Posted March 16, 2019 You plug the 3 fans into the 3x4 pin headers. You plug the 2 wire (3 pin) into the CPU_FAN header. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.