smile689 Posted July 21, 2019 Share Posted July 21, 2019 (edited) i bought dark core se rgb few days ago and i updated firmware. 3.35 but, if i disconnect wire,(usb receiver is conneted) not showing darkcore se in icue. disconnect usb receiver, and re connect receiver, showing in icue, and i can see dark core version is "?", suggest dark core firmware update in icue message. (but i cant update or update fail over 97%) if i use Wire mode, normally showing icue, and i can see 3.35 version. i have another dark core se, and this is normal.(but it is has problem, every 60 second, going to sleep) and both same, if i reboot my computer, Wireless Dark core SE reconnect receiver everytime if i want see in icue. i tried reinstall icue Edited July 21, 2019 by smile689 Link to comment Share on other sites More sharing options...
smile689 Posted July 21, 2019 Author Share Posted July 21, 2019 (edited) fixed wireleass issue today. but reboot issue is still occure when i computer boot, i can't see dark core menu in icue (Dark core SE is wireless status.) so i tried USB Receiver reconnect or Power switch on and off, it is fixable. but i always try this way every boot my computer. Edited July 21, 2019 by smile689 Link to comment Share on other sites More sharing options...
Apophis3 Posted July 21, 2019 Share Posted July 21, 2019 When you do a flash, firmware is updated in both the mouse and dongle. You may want to try a forced update, maybe something went wrong n the dongle update. Link to comment Share on other sites More sharing options...
smile689 Posted July 22, 2019 Author Share Posted July 22, 2019 i fixed version issue. but i have two dark core se and same occured other issue when i updated 3.35 firmware. this is dark core not showing in icue when my computer boot.(wirelessmode) if i reconnect dongle, it can be fix. also usb cable connected(wire mode) -> usb calbe disconnect(wireless mode), occured not showing in icue(also same way for fix) i tried re install firmware, and icue. but i cant fixed. Link to comment Share on other sites More sharing options...
Apophis3 Posted July 22, 2019 Share Posted July 22, 2019 i fixed version issue. but i have two dark core se and same occured other issue when i updated 3.35 firmware. this is dark core not showing in icue when my computer boot.(wirelessmode) if i reconnect dongle, it can be fix. also usb cable connected(wire mode) -> usb calbe disconnect(wireless mode), occured not showing in icue(also same way for fix) i tried re install firmware, and icue. but i cant fixed. Check if your Windows OS is using Fast Boot. If so, disable. Link to comment Share on other sites More sharing options...
smile689 Posted July 24, 2019 Author Share Posted July 24, 2019 Check if your Windows OS is using Fast Boot. If so, disable. thank you. i changed Ultra Fast Mode -> Fast Mode in BIOS, and it is fixed. Link to comment Share on other sites More sharing options...
Apophis3 Posted July 24, 2019 Share Posted July 24, 2019 Ahh, ok, so the BIOS wasn't initializing the USB device properly. :) Glad it's working for you now. Link to comment Share on other sites More sharing options...
lendoo Posted January 19, 2020 Share Posted January 19, 2020 Hi, Dark Core SE firmware update v3.35 stop working at 97%. BIOS fast boot disabled. The issue still occured all the times when I try to update. 1. Unplug USB and turn off device and back on. 2. Unplug then replug the USB receiver . . . then nothing happen... Link to comment Share on other sites More sharing options...
Apophis3 Posted January 19, 2020 Share Posted January 19, 2020 Is your dongle or mouse in a hub? Never flash from a hub. Link to comment Share on other sites More sharing options...
Recommended Posts