spartan300 Posted November 22, 2013 Share Posted November 22, 2013 Hi, I have bought Corsair 240GB Force GS CSSD-F240GBGS-BK and i put it in my new Asus Z87i-Pro . I install windows 7 64X and make all the updates. When i restart the pc it can find the ssd, but if i shutdown and then open then it has no problem booting. I update bios and also ssd with Corsair SSD Toolbox. Still nothing.If i make restart can find the SSD:confused::confused: Any suggestions. Thank you Loukas Link to comment Share on other sites More sharing options...
spartan300 Posted November 23, 2013 Author Share Posted November 23, 2013 Noone has any idea why this is happening??? :(::(::(: Link to comment Share on other sites More sharing options...
Toasted Posted November 23, 2013 Share Posted November 23, 2013 Have you tried a different SATA port and SATA data cable? Check your SATA connections as well. Link to comment Share on other sites More sharing options...
spartan300 Posted November 24, 2013 Author Share Posted November 24, 2013 no, i haven't. I use the cables that asus board has. When you say , check my SATA connections what do you meen? Thank you Link to comment Share on other sites More sharing options...
Toasted Posted November 25, 2013 Share Posted November 25, 2013 What i mean by checking the SATA connections is to make sure the connectors are plugged in properly and not loose, as well has the plug not pulling on the connector. Link to comment Share on other sites More sharing options...
JCB Posted November 26, 2013 Share Posted November 26, 2013 I have same problem with Corsair Force GS (firmware 5.20) on HP EliteBook 8460p (LG744EA) with SATA Mode AHCI. When i cloned SSD by Norton Ghost, then i have reboot problem. If i shut down PC and power on then have no boot problem... If i install Clean Windows 7 then have no boot problem again. I always use all HDDs and SSDs with Norton Ghost. But i cannot understand why i have a problem this time... When i want to firmware update with SSDToolBox then i got a message "No Firmware Update Available" So, when i want to firmware update manually Force GS 240GB then i didn't found firmware for my SSD. Cuz My Force GS 240GB firmware signature is 27889 and your firmware packages has no firmware for my disk. Another SSDs work all properly... For example Corsair Force 3 240GB, Samsung Evo 240GB and Corsair Force LS 240GB... Link to comment Share on other sites More sharing options...
Toasted Posted November 26, 2013 Share Posted November 26, 2013 Is the image file your are putting on the SSD originate from the SSD or a different HD? You can use the SSD toolbox to check for FW updates. Link to comment Share on other sites More sharing options...
JCB Posted November 26, 2013 Share Posted November 26, 2013 Thansk for reply Toasted, I also checked firmware updates with SSDToolbox, then i got a message "No firmware update available"... When i installed clean Windows 7 Ultimate, then SSD working fine. Maybe Corsair Force GS not compatibility with Intel SATA controller. Because when i installed clean Windows 7 x64, then Windows uses Microsoft Standard SATA Controller drivers. Now im cloning my disk again. Then i will install Windows 7 and i will turn back Microsft SATA controller. I will post here... I think its a firmware problem... Corsair has to solve this reboot problem for Force GS SSD drives at least time :)... Kind Regards, Link to comment Share on other sites More sharing options...
JCB Posted November 26, 2013 Share Posted November 26, 2013 I still have same problem... I uninstalled Intell SATA Controller driver and installed Microsoft Standard SATA Controller Driver, but still have a restart problem.. :( Anybody there to help me? Link to comment Share on other sites More sharing options...
spartan300 Posted November 27, 2013 Author Share Posted November 27, 2013 still the same with me too. NO RESOLTS. I've changed SATA port , cable, drives, NOTHING.:[pouts: I think someone from CORSAIR must give some ideas on this issue. Link to comment Share on other sites More sharing options...
Toasted Posted November 28, 2013 Share Posted November 28, 2013 @JCB Have you tried looking at the laptop's BIOS settings? @spartan300 Have you tried uninstall the RST drivers and use the MSAHCI drivers instead? Link to comment Share on other sites More sharing options...
biatche Posted December 5, 2013 Share Posted December 5, 2013 Toasted: 5.20 again, do you not see the pattern? It's still OUR problem? Link to comment Share on other sites More sharing options...
Frank28 Posted December 19, 2013 Share Posted December 19, 2013 I have the same issues with corsair force GS 360Gb Fw.5.20 plus fluctuating max speeds under ATTO benchmark from 300-555Mb/s but 555Mb/s is rare. Bad Corsair Firmware what a surprise. Link to comment Share on other sites More sharing options...
tel0302 Posted December 19, 2013 Share Posted December 19, 2013 I have two Corsair Force GS 360GB with 5.05 factory firmware. All works fine!!! (m/b Asus Z87-C) And I have two Corsair Force GS 360GB with 5.20 factory firmware. A have restart problem. Corsair Force GS SSD with fw5.20 not good work with haswell(z87, asus, gigabyte, msi, any notebooks). You may return SSD to seller for Warranty replacement Link to comment Share on other sites More sharing options...
Stormwin Posted December 19, 2013 Share Posted December 19, 2013 Salut, hi desoler je suis Français french, bad English me have probleme to force gs 180go 1 fois sur 3 il trouve pas le SSD au reboot Link to comment Share on other sites More sharing options...
Beerdude Posted December 23, 2013 Share Posted December 23, 2013 I'm having the same problem. The system with 5.07 works fine but the system with 5.20 is problematic. Can't even find 5.20 anymore and both systems say I have the latest firmware. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.