Corsair one SSD?

Greeting

 

all new module have M.2 SSD and HDD. is there any more space to fix 2x SDD and do i need to buy all cables or it come with package.

 

Best regards

There is an additional space for one 2.5" 7mm SSD or HDD, you need an extra SATA cable, power cable is already provided.

 

12" round cable worked perfectly for me: https://www.amazon.com/gp/product/B00L8KN9P4/.

There is an additional space for one 2.5" 7mm SSD or HDD, you need an extra SATA cable, power cable is already provided.

 

12" round cable worked perfectly for me: https://www.amazon.com/gp/product/B00L8KN9P4/.

 

Sorry that this reply is about 7 months after JetSerge's original post/reply but I've recently added a drive to the bottom bay in the case and I bought the cable you get to by directly following the provided link and had issues. The link takes you to a cable that has a straight connector on one end and a 90 degree one on the other. This cable did not work well for me. The straight had to connect to the mainboard, leaving the angled to attach to the drive. Due to the location of the drive this angle mashed up against the RAM clamp levers in that same general area. It really didn't fit without either popping the clamp lever(s) and halfway ejecting the RAM (which I did on first try, and learned the hard way by a machine that just did a bunch of weird clicking and refused to boot) or shoving it into the space in an awkward condition that put undue stress on the mainboard. long story short, buy the both ends straight version of this same cable: https://www.amazon.com/gp/product/B006K260T2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

I had no issues with the angled connector to the drive, but you are right, the straight one would be easier to fit. Thanks for sharing!