3Duser Posted January 11, 2011 Share Posted January 11, 2011 Ram Guy, I am having trouble with two things, and I'm wondering if you can help. I'm trying to enable AHCI in the BIOS on the Gigabyte GA-X58A-UD3R (Rev. 1) and I have set all the data modes to AHCI, but on booting I get "AHCI bios not installed". It boots fine, no operational errors, but it keeps telling me the drive (Corsair Force 120GB firmware 2.0) is on an IDE channel. Also I'm running 12GB of Corsair Dominator GT 2000mhz RAM, and it seems there is no option to go to the full 2000, I have either 1867mhz or 2133mhz. This is all running on Win 7 Ultimate x64 Any ideas about how to bring it up to full speed? Any help would be great. Cheers. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 11, 2011 Corsair Employee Share Posted January 11, 2011 Please use the "Sticky" at the top of this section called How to Enable/Check TRIM/AHCI in Windows 7 and check if its enabled and working. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.