SilentStorm Posted October 4, 2017 Share Posted October 4, 2017 Currently, I'm using Asus X399 Zenith Extreme with AMD 1950x. I can't seem to use the docp profile 3000mhz 15,17,17,35 1.35v (when enable it is actually at 3003mhz because the BCLK is set at 102.4) . It will fail to boot. I'm using the latest bios 0701. I have check the QVL and the cmr32gx4m4c3000c15 is on the list. When the profile is enable the timing auto change to as follow: CAS 15, RAS# to CAS# Read delay 17, RAS# to CAS# Write Delay 17, RAS# PRE time 17, RAS# ACT time 35. Voltage DRAM AB 1.35v and DRAM CD 1.35v. Can anyone help me with this? It can run at 2800mhz but any higher frequency, it won't boot. Link to comment Share on other sites More sharing options...
Tao Of Tech Posted October 14, 2017 Share Posted October 14, 2017 I've got the same problem, did you ever sove this? Currently, I'm using Asus X399 Zenith Extreme with AMD 1950x. I can't seem to use the docp profile 3000mhz 15,17,17,35 1.35v (when enable it is actually at 3003mhz because the BCLK is set at 102.4) . It will fail to boot. I'm using the latest bios 0701. I have check the QVL and the cmr32gx4m4c3000c15 is on the list. When the profile is enable the timing auto change to as follow: CAS 15, RAS# to CAS# Read delay 17, RAS# to CAS# Write Delay 17, RAS# PRE time 17, RAS# ACT time 35. Voltage DRAM AB 1.35v and DRAM CD 1.35v. Can anyone help me with this? It can run at 2800mhz but any higher frequency, it won't boot. Link to comment Share on other sites More sharing options...
SilentStorm Posted November 29, 2017 Author Share Posted November 29, 2017 Hi, I manage to get a replacement RAM. The new one seem to be able to boot but not stable at 3000mhz. 2800mhz is more stable. Just waiting for an update from asus to make it more compatible. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.