Jump to content
Corsair Community

Overclocking


Recommended Posts

I have installed the Corsair Vengeance LPX - Módulo de Memoria XMP 2.0 de Alto Rendimiento de 32 GB (2 x 16 GB, DDR4, 4000 MHz, C19) black color, part number CMK32GX4M2F4000C19 in Rog Strix Z370-h gaming motherboard of ASUS and only operate at 2133 MHz. When I use X.M.P. in the Bios to try to make them work to 4000 MHz the computer does not start. ASUS technicians tell me: "according to the specifications of the manufacturer of RAM, can work with stability up to 3000MHz, please check with the manufacturer of these memories as if there is a problem of stability or limitation."
Link to comment
Share on other sites

I don't think the Z370-H can handle that kit at full speed. 2x16GB @ 4000 is harder to achieve than 4x8GB @ 4000 and you need a real good memclocker of a board for that. So you probably have to manually reduce the memory frequency a couple of steps, when you enable the XMP.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...