LED strips and other questions

1) Does the LED strip have magnets underneath them? (if not where to get them)

2) i was planning on getting the 600C does that integrate with corsair link commander mini kit (i mean to say about the fan control buttons on the case) or does it connect seperatly in which case i can still use a commander mini in the case

3) also what is the maximum number of LED strips i can connect to the link commander mini

:!::!::!:

1. No, double sided sticky pads.
   
2. No, you can't use the buttons as the CL Mini can only be controlled using software.
   
3. The limit is the number of LEDs, not the number of strips.
   
4. Each LED takes 20mA, so in theory 100 LEDs, but I feel you would be pushing your luck if you used more than 80 LEDs.
   
5. The total current for the LEDs + Fans must be <= 4 Amps.

1. No, double sided sticky pads.
   
2. No, you can't use the buttons as the CL Mini can only be controlled using software.
   
3. The limit is the number of LEDs, not the number of strips.
   
4. Each LED takes 20mA, so in theory 100 LEDs, but I feel you would be pushing your luck if you used more than 80 LEDs.
   
5. The total current for the LEDs + Fans must be <= 4 Amps.

i asked a question which was related to using the corsair commander mini along side the buttons on the 600C case abnd got no answer but the other questions make sense also but how many LED's are in 1 strip is it 20 per strip

how many LED's are in 1 strip is it 20 per strip

This depends of the strip, looking at http://www.corsair.com/en-gb/corsair-link-rgb-led-lighting-kit this is specified as 9.