frekwalda Posted December 27, 2018 Share Posted December 27, 2018 Hello All: Well have most of our pieces we need for the build, just missing a few things on backorder. One thing i noticed is the top fan trays are 140mm and our H150i with 120mm fans do not fit on here. Did not want to stretch the hoses from the front fans. Went looking for the 4 x 120mm fan trays not available anywhere right now. Shout out to Zotty for suggesting fan adapters, so found some on Amazon that will work for now. They are by BGears and are Cooling fan adapters to go from 140mm to 120mm. This will work for a Temp fix until we get the fan tray. Also thanks again Zotty for the diagrams you put up to follow to wire up this monster of a case. One question for all who built this, looking at putting the RGB Fan LEd hubs inside the french doors. Anybody see a problem putting them there? Case - Corsair Obsidian Series 1000D CPU - Intel I9 - 9900K Processor CPU Cooler - Hydro Series H150i Pro RGB 360mm Liquid CPU Cooler Motherboard - ROG Maximus XI Extreme RAM - DDR4 G.Skill Trident Z RGB 4266Mhz 32GB (Back Order) Video Card - ROG Strix OC 1080Ti SSD's - Samsung 850 Pro x 3 Power Supply - Corsair HX 1200i Fans - Corsair ML120 Pro 120mm Premium x 16 (3 for CPU Cooler) Command Pro x 2 RGB Fan LED Hub x 3 Corsair LED Lighting Pro Expansion Kits x 3 Bgears Cooling Fan Adapter x 3 (Back Order) Monitor - Samsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms Link to comment Share on other sites More sharing options...
Zotty Posted December 27, 2018 Share Posted December 27, 2018 hi buddy... re the hubs.... i have 2 of mine hidden under the HDD Caddy.. you will find there is a space under there ;) :), i also suggest using DevBikers RGB Fan LED Hub Splitters :).. http://i.imgur.com/DGJ7Jjcl.jpg and here is your parts picture http://i.imgur.com/AzJhqbzl.jpg Link to comment Share on other sites More sharing options...
Zotty Posted December 27, 2018 Share Posted December 27, 2018 Hello All: Well have most of our pieces we need for the build, just missing a few things on backorder. One thing i noticed is the top fan trays are 140mm and our H150i with 120mm fans do not fit on here. Did not want to stretch the hoses from the front fans. Went looking for the 4 x 120mm fan trays not available anywhere right now. Shout out to Zotty for suggesting fan adapters, so found some on Amazon that will work for now. They are by BGears and are Cooling fan adapters to go from 140mm to 120mm. This will work for a Temp fix until we get the fan tray. I have just foreseen a problem with the Adaptors if using them for the h150i.. the fan spacing will be all wrong! the 120mm's will sit in the middle of the 140mm holes. meaning they will spaced to far apart for the rad..... Link to comment Share on other sites More sharing options...
Zorlacc Posted December 27, 2018 Share Posted December 27, 2018 Hi Zotty I cancelled the order on Amazon looking for another way to fix this issue now. Link to comment Share on other sites More sharing options...
Zotty Posted December 27, 2018 Share Posted December 27, 2018 Hi Zotty I cancelled the order on Amazon looking for another way to fix this issue now. I woke up this morning with it on my mind!.. just keep checking for stock is my advice.. wish i could help further! Link to comment Share on other sites More sharing options...
Zotty Posted December 27, 2018 Share Posted December 27, 2018 and if you guys use Discord :) https://discord.gg/b6x8HpM Link to comment Share on other sites More sharing options...
Zotty Posted December 27, 2018 Share Posted December 27, 2018 Your Fans :) http://i.imgur.com/rMScOn9l.jpg Link to comment Share on other sites More sharing options...
Zorlacc Posted December 27, 2018 Share Posted December 27, 2018 We looked at other ways and did not find anything to work without risk of same issue :/ So for now we will zip tie it until we can get the 120 tray and them buy two as the husband will get the same case down the road. I fully hate the idea of zip ties :/ Link to comment Share on other sites More sharing options...
Zotty Posted December 27, 2018 Share Posted December 27, 2018 We looked at other ways and did not find anything to work without risk of same issue :/ So for now we will zip tie it until we can get the 120 tray and them buy two as the husband will get the same case down the road. I fully hate the idea of zip ties :/ yeah i would also be fairly unhappy about the ziptie situation but i suppose sometimes you have to do stuff to survive.. off on a tangent.. sort of... i noticed they removed the 2x200mm trays from the store.. wish i had grabbed 2 of those now... just in case.... lol Link to comment Share on other sites More sharing options...
Zorlacc Posted December 27, 2018 Share Posted December 27, 2018 It makes me nuts new case not even a year out and its hard to get the other trays for it :/ Link to comment Share on other sites More sharing options...
Zorlacc Posted January 1, 2019 Share Posted January 1, 2019 Husband tested my fans the other day with no power on my MB... We had to zip tie the cooler on its four corners on the 140 tray at the top until we can get the 120 tray. The screen this build will be on ... The Obsidian Series 1000D making my Corsair 780T full tower look small lol And when all is said and done the specs ... Pimp My Ride PC Jan 2019 Case - Corsair Obsidian Series 1000D CPU - Intel I9 - 9900K Processor CPU Cooler - Hydro Series H150i Pro RGB 360mm Liquid CPU Cooler Motherboard - ROG Maximus XI Extreme RAM - DDR4 G.Skill Trident Z RGB 4266Mhz 32GB Tested Latency 17-18-18-38 Video Card - ROG Strix OC 1080Ti SSD's - Samsung 850 Pro X-Three-1TB Power Supply - Corsair HX 1200i Fans - Corsair ML120 Pro 120mm Premium x 16 (6 for CPU Cooler push pull) Command Pro x 2 RGB Fan LED Hub x 3 Corsair LED Lighting Pro Expansion Kits x 2 Monitor - Samsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms Win 10 Enterprise 64bit Link to comment Share on other sites More sharing options...
Zotty Posted January 2, 2019 Share Posted January 2, 2019 Coming along just nicely!!! Link to comment Share on other sites More sharing options...
Zorlacc Posted January 2, 2019 Share Posted January 2, 2019 Frekwalda got it all done tonight now just to add the ram when it comes in and the cable..... Link to comment Share on other sites More sharing options...
Zotty Posted January 2, 2019 Share Posted January 2, 2019 one can never have enough fans!!... progress was made tonight! well done guys Link to comment Share on other sites More sharing options...
Zorlacc Posted January 2, 2019 Share Posted January 2, 2019 Thank you much Zotty It was Frekwalda who did most of the work on this build. I got so much BS grief from people reg 16 fans 8 push 8 pull I fail to see a problem. Link to comment Share on other sites More sharing options...
mrgooden Posted January 2, 2019 Share Posted January 2, 2019 I think the biggest grief people give on the 1000D is when one does not use a custom loop. 500+ for a case and using an AIO. I still find it a waste, but to each their own. Enjoy. Link to comment Share on other sites More sharing options...
Zorlacc Posted January 2, 2019 Share Posted January 2, 2019 With all due respect I fully disagree as its a case you can build two rigs in as well as have room to work in the case. No law says its a case only for custom loop and its more of a problem for the one thinking this and not the one building in this amazing case with room to grow. Link to comment Share on other sites More sharing options...
Zorlacc Posted January 18, 2019 Share Posted January 18, 2019 @rossi123 Thank you much :] Sadly my ram is back ordered what was to be 4-6 weeks in dec has turned into feb end. But on a happy note my rig is ready to go and done as soon as my ram comes in. The hazard of buying new ram and it being short of stock lol. Edit ... And we got the 120 tray for my cpu cooler at the top so no more zip ties :] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.