Jump to content
Corsair Community

Survivor Stealth 64G cannot format - invalid superblock


drpeck

Recommended Posts

Hi Experts,

 

Issue started on a Windows 7 machine when I tried to format the key with Win32 DiskImager, as this was mentioned as TESTED and WORKING, don't recall the exact page.

Key is a brick, and would like some help to see if there is a way of recovering it, as this was a bit expensive for me.

 

In linux when clicking on the key a pop-up displays:

 

Unable to access "xxxxxx"

Error mounting /dev/sdb1 at /run/media/user/xxxxx: Wrong fs type, /dev/sdb1 has an invalid superblock or missing helper program.

 

 

When attempting to format:

 

Error formatting volume

Error synchronizing after initial wipe: Timed out waiting for object (udisks-error-quark,0)

 

Whether I try to format it: Internal disk for use with Linux systems only (Ext4) or FAT issue is the same.

 

Light blinks on the key for a sec and stops but thats it.

 

From the log messages during key insertion we can see it does recognize it.

 

$ sudo tail /var/log/messages

Jul 15 14:16:13 alp kernel: usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd

Jul 15 14:16:13 alp kernel: usb 4-1: New USB device found, idVendor=1b1c, idProduct=1a0a

Jul 15 14:16:13 alp kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Jul 15 14:16:13 alp kernel: usb 4-1: Product: Survivor 3.0

Jul 15 14:16:13 alp kernel: usb 4-1: Manufacturer: Corsair

Jul 15 14:16:13 alp kernel: usb 4-1: SerialNumber: xxxxxxxxxxxxxxxxxxxxxxxxxxxx

Jul 15 14:16:13 alp kernel: usb-storage 4-1:1.0: USB Mass Storage device detected

Jul 15 14:16:13 alp kernel: scsi host7: usb-storage 4-1:1.0

Jul 15 14:16:13 alp mtp-probe: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb4/4-1"

Jul 15 14:16:13 alp mtp-probe: bus: 4, device: 3 was not an MTP device

Jul 15 14:16:14 alp kernel: scsi 7:0:0:0: Direct-Access Corsair Survivor 3.0 000A PQ: 0 ANSI: 6

Jul 15 14:16:14 alp kernel: sd 7:0:0:0: Attached scsi generic sg2 type 0

Jul 15 14:16:14 alp kernel: sd 7:0:0:0: [sdb] 121061376 512-byte logical blocks: (61.9 GB/57.7 GiB)

Jul 15 14:16:14 alp kernel: sd 7:0:0:0: [sdb] Write Protect is off

Jul 15 14:16:14 alp kernel: sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA

Jul 15 14:16:14 alp kernel: sdb: sdb1

Jul 15 14:16:14 alp kernel: sd 7:0:0:0: [sdb] Attached SCSI removable disk

...3lines

Jul 15 14:16:14 alp journal: Unable to mount volume CentOS 7 x86_64: Gio.IOErrorEnum: Error mounting /dev/sdb1 at /run/media/user/xxxxxxxx: Wrong fs type, /dev/sdb1 has an invalid superblock or missing helper program.

 

Any suggestions to recover the key are welcom.

Edited by drpeck
typo and added couple more lines
Link to comment
Share on other sites

×
×
  • Create New...