Jump to content
Corsair Community

The First Double Sided Mod Art QUADRAD Custom Case In The World


Recommended Posts

Mod Art QUADRAD Custom Case / With Four Loop Four Rad Four Rez

 

Project Final

 

modart-quadrad-custom-case-1.jpg modart-quadrad-custom-case-3.jpg

 

modart-quadrad-custom-case-8.jpg modart-quadrad-custom-case-9.jpg

 

modart-quadrad-custom-case-10.jpg

 

http://imagizer.imageshack.us/v2/1600x1200q90/923/hX2qEk.jpg

 

 

MG-6999.jpg MG-7003.jpg

 

MG-7008.jpg MG-7012.jpg

 

MG-7027.jpg MG-7099.jpg

 

MG-7102.jpg MG-6914.jpg

 

Hello there. Welcome to my new project...:D:

 

 

We designed a big extreme case. A case with a square look.

4 radiators, 4 pumps, 4 reservoirs in the system.

I wanted to build a system with 4 loops. ;):

 

For this reason the name QUAD-RAD.

 

Case design is mine.

 

Thanks to arg-ist for hand labor ..

 

http://imageshack.com/a/img921/8210/gZyEYU.jpg

 

 

This case can be used in different systems.

 

The case would be made from scratch, not by modifying a standard case.

After our first work, we decided to make a case in this view.

 

Case Designed as square cross-section and 45 degree broken.

The case is a plain-flap shape with the front and rear top panels on the wings.

It is designed to bend 45 degrees towards the side covers.

With this, the depth of the cradle, normally 18 cm, was removed by 30 cm.

 

http://imageshack.com/a/img923/6875/Dlwv0s.jpg

 

We started making a 1/1 carton to see what the case would be like.

 

http://imageshack.com/a/img923/8772/maOgZ8.jpghttp://imageshack.com/a/img924/5848/21edxY.jpg

 

http://imageshack.com/a/img923/3414/6piP7m.jpghttp://imageshack.com/a/img923/7025/om7dov.jpg

 

http://imageshack.com/a/img922/7057/uJHjmY.jpghttp://imageshack.com/a/img922/1410/vWxfIc.jpg

 

http://imageshack.com/a/img923/3294/ZZ5e08.jpghttp://imageshack.com/a/img924/7486/VkAKDv.jpg

_MG_5593fjhdt.thumb.jpg.c6dada47179b399289b436a1422db4bc.jpg

Link to comment
Share on other sites

We made vector drawings of Case.

 

We used 1.20 mm sheet metal.

 

After the interrupted spaces, the finished state of the empty stall was 12.5 kg. thumb.gif

 

Corsair Obsidian Series 900D Super Tower Case is 18.6 kg.....rolleyes.gif

 

During vector drawing, we decided to make the box from 4 equal parts, 2 smaller parts equal to the upper and lower, 2 larger parts equal to the front and the back.

 

The chassis 2 will consist of the top and bottom parts, 2 front and back parts, motherboard back plate.

 

The radiator grills, specially designed on the 4 sides of the cabin, are integrated with the frame.

 

In the bottom and top part, another four 20mm diameter holes from the grille will fill the system with liquid from the top.

 

There are 2 side parts, integrated fangriller and a panel which provides all cable entry and exit into the case in the lower parts coming to the corners.

 

At the top, a 30 mm diameter ON-OF button and a 22 mm restart button were made.

 

And two USB 3.00 sockets were made.

 

There are also two 5.25 drawers for fan controllers close to the top.

The HDD control drawer was made near the bottom.

 

The front and back panels were equally spaced so that both sides of the frame could be used as the front panel.

 

http://imageshack.com/a/img922/2835/EOFmWI.jpg

 

http://imageshack.com/a/img923/5969/mnRBG8.jpg

 

http://imageshack.com/a/img921/3008/fktyS5.jpg

 

http://imageshack.com/a/img923/3312/mgHnpW.jpg

Link to comment
Share on other sites

The drawings were cut in CNC laser.

 

And the CNC sheet is bent with metal bender.

 

http://imageshack.com/a/img923/9514/DyoHvO.jpg

http://imageshack.com/a/img921/683/QQ7iWj.jpg

 

Twisted parts

The cut and bent parts together in bulk.

 

http://imageshack.com/a/img922/2492/F2CF5I.jpg

http://imageshack.com/a/img923/3555/sURcub.jpg

http://imageshack.com/a/img921/8518/89Ne90.jpg

http://imageshack.com/a/img922/9597/eOc2e8.jpg

 

 

Front and rear panel interior and exterior details.

Details of the upper and lower panels.

 

http://imageshack.com/a/img921/1627/wdy4dc.jpg

http://imageshack.com/a/img922/3374/IPoyuK.jpg

http://imageshack.com/a/img921/7012/PhECT8.jpg

http://imageshack.com/a/img921/7964/7hJkfm.jpg

http://imageshack.com/a/img922/7711/0dx52D.jpg

Link to comment
Share on other sites

The parts were assembled for testing purposes.

 

http://imageshack.com/a/img924/380/Jw6C6s.jpg

 

http://imageshack.com/a/img921/2574/TYj5kT.jpg

 

http://imageshack.com/a/img924/5048/qfUdgb.jpg

 

http://imageshack.com/a/img924/2872/jz6sIS.jpg

 

http://imageshack.com/a/img921/7259/zBnZM7.jpg

 

http://imageshack.com/a/img924/4030/Z2eNpk.jpg

Link to comment
Share on other sites

  • 2 weeks later...

The base and ceiling were made of 2 pieces of hair marked in the picture to prevent the shaking of the table.

 

http://imageshack.com/a/img923/3227/wO7mSv.jpg

 

 

They were then welded to the base and ceiling.

 

 

http://imageshack.com/a/img922/9628/her1gL.jpg

 

 

Then, the back panel was screwed between them. This has increased the stability much more.

 

 

http://imageshack.com/a/img922/2497/wMXq4J.jpg

 

http://imageshack.com/a/img921/8617/ABoAqB.jpg

 

http://imageshack.com/a/img922/5967/nPWV62.jpg

Link to comment
Share on other sites

I / O Panel is set to face down.

 

http://imageshack.com/a/img922/3316/zxjugp.jpg

 

 

Special extension cables must be used on all sockets to not open the cover each time to mount the mainland cable.

 

 

http://imageshack.com/a/img923/9417/IjweUb.jpg

 

 

There is no need to open the case cover with extension cables to be attached to the case corners.

 

Cables collected at the corners.

 

With the holes to be opened, the cables will be hidden behind the panel.

 

 

http://imageshack.com/a/img923/6471/rZ5SCv.jpg

 

http://imageshack.com/a/img923/1249/2TS2td.jpg

 

http://imageshack.com/a/img924/9008/vflM7j.jpg

Link to comment
Share on other sites

Mounted cable sockets and their cabling.

 

And the cables were taken from these holes to the rear.

 

 

http://imageshack.com/a/img924/7940/NWyyVF.jpg

 

http://imageshack.com/a/img924/7180/2M7O4l.jpg

 

http://imageshack.com/a/img921/9704/iMco8i.jpg

 

http://imageshack.com/a/img924/9673/sEsvIN.jpg

Link to comment
Share on other sites

1- Display Port panel mount cable Male/Female StarTech 3-Feet (6 pcs)

2- USB 3.0 Dual Male/Female Panel Mount Cable 100cm (6 pcs)

3- HDMI 1.4 19pin Male/Female Panel Mount Extension Cable 60cm(5 pcs)

4- DualPort USB3.0 Female Mount to Motherboard 20pin Cable40cm(2 pcs)

5- MecallTech RJ45 Male/Female Panel Mount Ethernet 60cm (2 pcs)

6- AC 250V C14 Power Cord Inlet Plug Socket Switch Screw Mount(2 pcs)

7- Ugreen Digital Optical audio cable Toslink gold plate 100cm(2 pcs)

8- Ugreen High Speed Cat 7 RJ45 Ethernet Network Cable 200cm (2 pcs)

9- Kenable RCA Panel Mount Socket Audio Red White & Yellow set(2 set)

10-Kenable Optical TOSlink Panel Mount Socket to Socket (2 pcs)

11-Kenable Panel Mount 3.5mm Male/Female Locking Nut Stereo (6 pcs)

12-Vention Jack 2 RCA Audio Cable to 2 RCA Aux Cable 100cm (2 pcs)

 

http://i.hizliresim.com/2noBVv.jpg

kablolar.thumb.jpg.875af895214032e0ea8f47c1289af58b.jpg

Link to comment
Share on other sites

Valve locations were opened for evacuation at the front and back of the case.

 

http://imageshack.com/a/img924/8871/SJkbrS.jpg

 

http://imageshack.com/a/img923/4656/jcydrT.jpg

 

 

Adopted instead of fan controller and HDD switch.

 

 

http://imageshack.com/a/img922/1659/ciuoVV.jpg

 

http://imageshack.com/a/img922/3532/c1Dwiq.jpg

Link to comment
Share on other sites

Aluminum parts cut for 5.25 drawers.

 

And fan controller, HDD switch mounted instead of trial.

 

http://imageshack.com/a/img924/7711/GwICT2.jpg

 

http://imageshack.com/a/img921/5818/K6TPeY.jpg

 

http://imageshack.com/a/img923/7936/VmmCmf.jpg

 

http://imageshack.com/a/img923/5818/CyThre.jpg

 

http://imageshack.com/a/img922/7158/6sI9RH.jpg

 

http://imageshack.com/a/img922/6148/zd3vaR.jpg

Link to comment
Share on other sites

A mounting kit was made to mount the PSU on the backside.

 

And it was replaced by the PSU. Test purpose

 

 

http://imageshack.com/a/img921/2262/yWBVp2.jpg

 

http://imageshack.com/a/img923/6703/FD5eEc.jpg

 

http://imageshack.com/a/img922/7172/xoMWgo.jpg

 

http://imageshack.com/a/img924/2164/Em3osH.jpg

Link to comment
Share on other sites

  • 2 weeks later...

SSDs and HDDs have been located.

 

http://imageshack.com/a/img921/9264/PM7s3K.jpg

 

Mounting kit for SSD and HDD was made.

 

2 for HDDs, 1 for SSDs.

 

A total of 4 HDDs and 4 SSD slots are available.

 

A gap was left under the skids for cable taps.

 

 

http://imageshack.com/a/img924/2055/lDcHnO.jpg

 

http://imageshack.com/a/img922/9146/MNQzpb.jpg

Link to comment
Share on other sites

The cables from the corners of the corridors were passed under the SSD and HDDs and were directed to the mainland.

 

http://imageshack.com/a/img922/7949/RlCbWi.jpg

http://imageshack.com/a/img924/6532/80lxOo.jpg

 

 

 

With the installation of PSU + SSD and HDDs, the case back has such an appearance.

 

 

http://imageshack.com/a/img921/1471/4g3kW9.jpg

Link to comment
Share on other sites

  • 1 month later...

Bars for I / O Panel were made.

 

 

http://imageshack.com/a/img924/4633/Wyn1Uv.jpg

 

http://imageshack.com/a/img923/8569/WmhVEU.jpg

 

 

And these were done on the truck.

 

http://imageshack.com/a/img921/8709/YitPXM.jpg

 

 

The back of the CPU socket is cut.

 

 

http://imageshack.com/a/img921/9678/qRWyAX.jpg

 

A trial board was provided with the following appearance.

 

 

http://imageshack.com/a/img923/3628/mh4k0n.jpg

 

http://imageshack.com/a/img922/7465/8LZ7n3.jpg

 

http://imageshack.com/a/img923/8854/bKwZEj.jpg

 

http://imageshack.com/a/img922/9953/P6Maa5.jpg

Link to comment
Share on other sites

The plexi hatches are now in place. The plexi was made from the cover plate.

 

The plexi cover will be smaller than 1 cm of the foot on the sides of the case.

 

The corners will twist.

 

Plexi cover was drawn in corel program. The laser was cut.

 

http://imageshack.com/a/img922/3680/rv5mM8.jpg

 

http://imageshack.com/a/img923/4246/a3O6Va.jpg

 

http://imageshack.com/a/img924/7181/WjcKsF.jpg

 

http://imageshack.com/a/img921/1054/znxvKP.jpg

Link to comment
Share on other sites

These lids will be given a stand image in the space. To achieve this, long thin metal feet between the plexi and the case were considered.

 

http://imageshack.com/a/img921/9619/LvXa2X.jpg

 

These feet were made in 2 pieces.

 

When these feet were connected to each other and to the cage, this was achieved at the front and back.

 

 

http://imageshack.com/a/img922/1554/mjTyG2.jpg

 

http://imageshack.com/a/img924/8821/7acc1Q.jpg

 

http://imageshack.com/a/img924/3227/qekr33.jpg

 

http://imageshack.com/a/img924/9431/shC3aZ.jpg

 

 

Threaded rods were mounted for easy mounting of the end caps of the bars.

 

http://imageshack.com/a/img921/8921/bPIE8d.jpg

Link to comment
Share on other sites

The trial was interrupted by the plexi being interrupted.

 

http://imageshack.com/a/img924/9924/Oz0Lew.jpg

 

http://imageshack.com/a/img923/6347/JDK2nq.jpg

 

 

Now the ears in the corners are bent. The marked parts on the four corners of the frame will bend.

 

http://imageshack.com/a/img921/7070/AMnUVK.jpg

 

 

 

Bending process.

The parts to bend.

 

http://imageshack.com/a/img924/2927/zI2daP.jpg

 

http://imageshack.com/a/img924/7412/zq2GTK.jpg

 

 

The plexi was fixed by placing an aluminum sheet on the lower part.

 

http://imageshack.com/a/img921/857/F3D5yp.jpg

 

 

 

The bending part was heated with hot air gun.

 

http://imageshack.com/a/img924/8071/96lukd.jpg

 

 

 

And twisted parts.

 

http://imageshack.com/a/img921/1844/RHV0mr.jpg

 

http://imageshack.com/a/img924/4748/338rNA.jpg

 

http://imageshack.com/a/img921/8893/7PLKnA.jpg

 

http://imageshack.com/a/img921/5757/29dMz5.jpg

Link to comment
Share on other sites

The drawings were cut in CNC laser.

 

To check the size of the sockets, the cable box was panned out and the gauge was checked. Necessary corrections were made.

 

pmnJByWZj

pn2TS2tdj

 

Nice going on the build of the case, looking spectacular, is there any need for all those ports? xD

 

i wonder if there is gonna be a colour scheme for the case?

Link to comment
Share on other sites

Nice going on the build of the case, looking spectacular, is there any need for all those ports? xD

 

i wonder if there is gonna be a colour scheme for the case?

 

 

First of all thank you very much. :) Many thanks for your interest.

 

I need these ports. Because all the outputs are out of the case.

 

The project will be completed shortly.

Link to comment
Share on other sites

  • 4 months later...

Hello friends...

I have not been active for a long time. Sorry.:)

Our baby was born. ... :) And a boy. :)

 

Project completed. And slowly I will add pictures ...

 

 

the braas parts came from nickel coating.

 

http://imageshack.com/a/img922/6369/Cf5XSv.jpg

 

http://imageshack.com/a/img922/8071/T805bd.jpg

 

 

And we decided on case coloring

 

http://imageshack.com/a/img923/8933/fGoQhG.jpg

 

http://imageshack.com/a/img921/6789/wb7LrM.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...