Minejire Posted January 12, 2019 Share Posted January 12, 2019 Recently i got: x1 LL120 and the x3 pack with Lighting Node included. The x3 pack is working as intended but the one i bought individually doesn't (the fan is spinning btw but rgb doesn't work). I've tried everything but no luck. All four fans are connected into the RGB Hub 1, 2, 3 and 4 (the one that doesn't work). i'm running 4 LL fans channel 1 on iCUE, should i RMA? Link to comment Share on other sites More sharing options...
DevBiker Posted January 12, 2019 Share Posted January 12, 2019 Before you RMA, check that the Lighting Channel is configured for 4 LL fans (they aren't detected). Also, swap fan 3 and fan 4 in the fan hub. It's possible that fan 3 is the one that's bad - the fans operate in series so it's possible that a fan lights up but doesn't pass the signal down. Link to comment Share on other sites More sharing options...
Minejire Posted January 13, 2019 Author Share Posted January 13, 2019 Already did but no luck. Amazon sent me a new one, it should arrive this monday and see if it works Link to comment Share on other sites More sharing options...
Minejire Posted January 14, 2019 Author Share Posted January 14, 2019 I can say that it was a defective unit, the new one that Amazon sent me works just fine Thanks :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.