paleriderdt Posted July 15, 2005 Share Posted July 15, 2005 Hi A buddy and I have been trying to get his Abit VT7 MB to handle the 2-VS1GBKIT400 kits that he has installed. We are wondering what the BIOS settings need to be specifically to be able to run winXP applications and games stabily. Link to comment Share on other sites More sharing options...
Wired Posted July 15, 2005 Share Posted July 15, 2005 CAS Latency (tCL): 3 RAS to CAS Delay (tRCD): 4 Row Precharge (tRP): 4 Active to Precharge Delay (tRAS): 8 Memory Voltage: 2.75 Volts (may need to bump up a bit, max voltage is 2.9) All other settings to defaults. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted July 15, 2005 Corsair Employee Share Posted July 15, 2005 Please test the modules one at a time with http://www.memtest.org and I would set the timings to Cass 2.5-3-3-8 and set the Dm Voltage to 2.7 Volts and if all pass then put them together and set the Dim Voltage to 2.8 Volts and you may need to relax the memory frequency with 4 modules to DDR333. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.