Destroid Posted March 25, 2013 Share Posted March 25, 2013 I'll try and keep this short: New build, all new parts, everything seated correctly - triple checked. Corsair CX600 Modular PS Gigabyte Intel UD3H motherboard Switched on the power. The fans spin briefly, but then die and nothing else happens. The motherboard does not POST or even throw an error code on the LED. I have heard elsewhere that there could be an issue with the motherboard/PSU not seeing that the power flow is good. Very technical, I know. :o: Any ideas? Link to comment Share on other sites More sharing options...
peanutz94 Posted March 25, 2013 Share Posted March 25, 2013 Try the paperclip test found in the stickys . If the PSu starts with a case fan attached. Then it may be a DOA MB. http://forum.corsair.com/v3/showthread.php?t=63991 Are you sure you have both 24pin and 8pin EPS connected correctly? Link to comment Share on other sites More sharing options...
Destroid Posted March 26, 2013 Author Share Posted March 26, 2013 Thank you for the reply. It was indeed that I was missing the 8-pin power connector. PCs I've built in the past only had the large 20- or 24-pin connector (or maybe I just didn't remeber), so this one slipped right by me. How embarassing. :!oops: The PC runs perfectly now, no issues, aside from the noobish builder. :laughing: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.