doberschelp Posted February 13, 2019 Share Posted February 13, 2019 Hi, new member old user (73, so bear with me) here. I've found the schematics in the Corsairs Obsidian 500D SE Setup Advice and Diagrams to be most helpful and to whomever made them, thanks so much! In my newest build, the Corsair 500D SE has four LL 120s front and rear and two LL 140s (cooler) tied into the Commander Pro and the Lighting Controller. The Corsair H115i RGB Platinum AIO Liquid CPU Cooler, 280mm (I've switched the ML 140s to the LL 140s) has a USB connector that according to the schematic goes into the Commander Pro, a 4 pin fan output into CPU FAN, a SATA connection to the power supply, and a 4 pin/3 pin male connector that has me completely baffled. I didn't see the male connector anywhere in the schematics. Can someone please help me out tell me where this male 4/3 pin male connector goes? Thanks/DaveO Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Calico Jack Posted February 13, 2019 Corsair Employee Share Posted February 13, 2019 It connects to the fans that come supplied with the cooler. It's meant to allow the fans to function based off the current temps of the cooler and to free up fan ports on the motherboard. Link to comment Share on other sites More sharing options...
doberschelp Posted February 13, 2019 Author Share Posted February 13, 2019 Thanks you for the response. Now I'm really confused as both outputs on the cooler fans are connected to the Commander Pro and the Lighting Controller. What am I missing here? Link to comment Share on other sites More sharing options...
doberschelp Posted February 13, 2019 Author Share Posted February 13, 2019 At https://forums.tomshardware.com/threads/corsair-h115i-rgb-platinum-wiring.3435167/ there is a lengthy explanation of how the Corsair H115i Platinum Pro should be configured. In short, The H115i fans are not to be connected to the Commander Pro. Thanks to Corsair Calico Jack for pointing me in the right direction. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Calico Jack Posted February 13, 2019 Corsair Employee Share Posted February 13, 2019 You're welcome ^.^ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.