speedykiwi Posted November 23, 2005 Share Posted November 23, 2005 Hi guys, I have a gigabyte GA-K8NF-9 and was wondering if TWINX2048-3200C2PRO will work with it.....also what is the volts on this ram? I have looked under the which ram works with your MB but not in there....in fact I can't find my ram model on your site either. Thank you. Link to comment Share on other sites More sharing options...
Wired Posted November 23, 2005 Share Posted November 23, 2005 http://www.giga-byte.com/MotherBoard/Products/Products_Spec_GA-K8NF-9.htm Yep, they'll work fine. CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts (max warrantied voltage is up to, but not over, 2.9 volts) All other settings to defaults. Link to comment Share on other sites More sharing options...
Steve Lindemann Posted November 26, 2005 Share Posted November 26, 2005 Will the same specs apply for using the TWINX2048-3200C2PRO memory on an ASUS A8N-SLI mobo? For some reason, my mobo won't recognize that this is 400mhz memory, it thinks its only 333 and therefore I have to configure all of the timing manually. But this is new to me, so any help will be appreciated! Link to comment Share on other sites More sharing options...
Wired Posted November 26, 2005 Share Posted November 26, 2005 Will the same specs apply for using the TWINX2048-3200C2PRO memory on an ASUS A8N-SLI mobo? For some reason, my mobo won't recognize that this is 400mhz memory, it thinks its only 333 and therefore I have to configure all of the timing manually. But this is new to me, so any help will be appreciated! The timings are dependant on the memory, not the motherboard. Memory: TWINX2048-3200C2PRO (Qty 2 = 4GB) You're running 4 sticks. That's why the FSB is dropped, that's normal. The 2-3-3-6-1T timings are only guaranteed with 2 sticks, not 4. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.