Zator Posted August 10, 2009 Share Posted August 10, 2009 The system powers off and on with both memory modules installed, usually at POST but sometimes at windows startup or even after login. The system works fine with 1 module installed, doesn't matter which one. At first I replaced the PSU but the problem persists, secondly i replaced the memory thinking it was a memory issue, same problem... This is a server thats been down for a week now, help! :(: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 10, 2009 Corsair Employee Share Posted August 10, 2009 If the system will run and pass http://www.memtest.org with either module one at a time but does this when both are installed that would suggest there may be a problem with the MB especially if you replaced the PSU and still have the same issue. But I would test them in another system to be sure. Link to comment Share on other sites More sharing options...
Zator Posted August 11, 2009 Author Share Posted August 11, 2009 If the system will run and pass http://www.memtest.org with either module one at a time but does this when both are installed that would suggest there may be a problem with the MB especially if you replaced the PSU and still have the same issue. But I would test them in another system to be sure. Thanks for the quick reply.... Memtest clears both memory's so i will go ahead and replace the mobo... hoping that the onboard Intel Matrix RAID is smart enough survive the mobo change! :sigh!: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 11, 2009 Corsair Employee Share Posted August 11, 2009 It should just make sure the drives are connected to the same position as before and do not let it write a new header to the drives Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.