CaffeineGains Posted November 7, 2015 Share Posted November 7, 2015 I just bought a Strafe RGB (Silent, if it makes a difference) and when I plug it in, in any and all configurations and ports (pass-through first, only one cable, USB 3 or 2), I don't get any light in the keyboard or any device registration. It doesn't work in BIOS and Windows 10 64-bit gives me the unknown USB error in the title. Does anybody have any clue as to a fix before I RMA it? Link to comment Share on other sites More sharing options...
Inheritance Posted November 8, 2015 Share Posted November 8, 2015 does CUE detect it? and have you check your chipset and bios for update. Link to comment Share on other sites More sharing options...
CaffeineGains Posted November 8, 2015 Author Share Posted November 8, 2015 No, CUE doesn't detect any device at all. And the first thing I did was doing a BIOS and chipset update, so that's not it either. Link to comment Share on other sites More sharing options...
Toasted Posted November 8, 2015 Share Posted November 8, 2015 Could be corrupted/bad firmware. Contact customer service and ask if they can help you restore the firmware for your keyboard. Link to comment Share on other sites More sharing options...
Snappy Posted January 9, 2016 Share Posted January 9, 2016 I have the exact same problem with my Strafe RGB. Bought it this friday. Cue/Windows 10 64bit do NOT reconize the keyboard. The boards ASWD and arrow keys are flashing light-blue every 5-7 secs and all keys gives a white flash afterwords. And I cannot acces the settings tab in CUE. Running clean Windows 10pro install. Tried all the suggested solutions. Holding down the ESC key, makes the board go red with white ASWD and white arrows. Holding down the esc key, gives the opportunity to acces the settings tab once when running the exe file in windows 7 compatility mode (the 2. Time it doesn't - have to remove usb cable to acces again.) At this time it is possible to click update firmware - and then the update stalls at 3%). The boards status is "Malfunction". It seems to the keyboard isn't all dead, it's possible to acces it as a flashdrive (and the firmware file is accessible) when holding a needle in the tiny hole behind the foot and the backside. I don't know if you can get yours to work, doing any of this, but I will be contacting support this Monday or be returning it to the store asap. Does anyone know how to get the 1.33 strafe firmware as a file? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.