5jefro7 Posted January 12, 2010 Share Posted January 12, 2010 Can anyone take a quick measurement of the rectangular mesh on the back of the case above the fan mesh? If it's not too much to ask, I'd also like to get the idea of the size of the mesh below the expansion slots I'm in the process of putting together some air filters & may have to see if I can come up with ones for these openings..hopefully, my case should be here within the next 4 or 5 days Link to comment Share on other sites More sharing options...
Raptor-X Posted January 12, 2010 Share Posted January 12, 2010 Top Mesh = 6.0" x 2.0" Bottom Mesh = 4.75" x .75" Regards, Raptor Link to comment Share on other sites More sharing options...
5jefro7 Posted January 12, 2010 Author Share Posted January 12, 2010 thank you, sir Link to comment Share on other sites More sharing options...
Raptor-X Posted January 12, 2010 Share Posted January 12, 2010 You are welcome. Enjoy your new case. It is a great one. Link to comment Share on other sites More sharing options...
5jefro7 Posted January 12, 2010 Author Share Posted January 12, 2010 if anyone is contemplating making their own dust filters, I can help out with some of the mesh..got far more than I need... I bought a 3' x 7' roll of solar screen from the local hardware chain (know ANY pc with a fan area of 21 square feet?) and for magnetic strips, I've found this to be about the best deal around: https://www.promagproducts.com/catalog/product_info.php?products_id=75&osCsid=8rp990f6lu77bndnaj7epfv2s3 the local craft store wants about $1.00/30" & $4.00/10'...now that I know where THEY get it, the ricing isn't so bad Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.