sfprankster Posted March 7, 2014 Share Posted March 7, 2014 Now that you have made the switch, what do you think of the 540? How do the 2 cases compare? Personally, I have never a fan of full tower cases. Bigger is not always better. The 540 has a smaller overall footprint, mainly front to back length and shorter height. This allows me more flexibility to place the desktop in my home office. The amount of internal space and compartmental layout makes building the 540 a breeze. This layout gives several options for cooling/cable management the HAF can only dream about. In the HAF case, I used a Corsair H80i mounted in the rear fan exhaust. For the 540 case, I switched to an H100i cooler. With the unobstructed air flow, change of CPU coolers, my temps have dropped a noticeable level. I now run the case fans at a lower RPM, and also noticed a drop in the sound level as well. I never understood the idea behind placing the HDD cages directly in the path of air in most case designs. Oh yeah, I almost forgot the most important mod on my build, the removal of the red led's in the Sound Blaster Z(snip goes the warranty). The amount of light these led's output is obnoxious. I planned on replacing them with lower output white led's, but found the sound card works fine with the led's removed. A nice addition to the 540 would be a dust filter kit. .....or releasing SP140 fans. Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 7, 2014 Share Posted March 7, 2014 True either way it's a nightmare lol. Link to comment Share on other sites More sharing options...
wytnyt Posted March 7, 2014 Share Posted March 7, 2014 Sounds like you've done DIY residential plumbing repair in the past :p: :D: odd you mention this,i bought my home in june '96 and had no a/c,i spent 2 weeks cutting holes,,running ductwork,,making central a/c work in a house not designed for it,sweating my rear off.. actually only last week i replaced the last item in my home the toilet 1 Link to comment Share on other sites More sharing options...
babysnakes Posted March 12, 2014 Share Posted March 12, 2014 (edited) Core i7 3820 @ 4.6Ghz on a Glacer 240L Edited March 12, 2014 by Yellowbeard Added image to post 1 Link to comment Share on other sites More sharing options...
Silverstone Posted March 12, 2014 Share Posted March 12, 2014 I guess I post in here too?? When the case was released, I had to take a trip down to Akihabara to see if they had one of these available. I got lucky and was able to get my hands on one. The others on display were purchased and waiting pickup. That was a long train ride, and got plenty of looks from people as I blocked half the isle with a large box, but it paid off. I gave my 600T to my friend and swapped the components into my new 540. Eventually, water cooling came. When I return home, I need to see if I can cut the bottom to fit a 240 or even another 280 radiator. http://i1306.photobucket.com/albums/s562/Silverstone-Z/IMG_0161_zps1f55d7d2.jpg~original 1 1 Link to comment Share on other sites More sharing options...
Kovoet Posted March 12, 2014 Author Share Posted March 12, 2014 http://imagizer.imageshack.us/v2/1024x768q90/823/0jli.jpg My cable combs have arrived Link to comment Share on other sites More sharing options...
wytnyt Posted March 12, 2014 Share Posted March 12, 2014 I guess I post in here too?? When the case was released, I had to take a trip down to Akihabara to see if they had one of these available. I got lucky and was able to get my hands on one. The others on display were purchased and waiting pickup. That was a long train ride, and got plenty of looks from people as I blocked half the isle with a large box, but it paid off. I gave my 600T to my friend and swapped the components into my new 540. Eventually, water cooling came. When I return home, I need to see if I can cut the bottom to fit a 240 or even another 280 radiator. http://i1306.photobucket.com/albums/s562/Silverstone-Z/IMG_0161_zps1f55d7d2.jpg~original nice build,,nice color nice period but how DARE you and only post 1 pic like i used to tell the ladies i wanna see your goodies!:D: Link to comment Share on other sites More sharing options...
Silverstone Posted March 13, 2014 Share Posted March 13, 2014 (edited) Thank you, thank you. Give me a second. That is the best picture I've gotten, though. Haha http://forum.corsair.com/v3/showthread.php?t=127215 Edited March 13, 2014 by Silverstone Link to comment Share on other sites More sharing options...
Kovoet Posted March 13, 2014 Author Share Posted March 13, 2014 http://imagizer.imageshack.us/v2/1024x768q90/199/7qri.jpg With the new cable combs Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 13, 2014 Share Posted March 13, 2014 Looked a lot better without the combs Imo. I'd paint them red. Then wouldn't be so noticeable. 1 Link to comment Share on other sites More sharing options...
Kovoet Posted March 13, 2014 Author Share Posted March 13, 2014 Looked a lot better without the combs Imo. I'd paint them red. Then wouldn't be so noticeable. Just had a look and like an idiot I left the plastic layers on. Thanks will take these off and have a look then Link to comment Share on other sites More sharing options...
Silverstone Posted March 13, 2014 Share Posted March 13, 2014 Use the combs further back to the point where they can be hidden behind the mobo tray. I understand these are the fabric-type sleeves, and they're not rigid, but I know you can make it look well organized. I need to get me some of those in the future to help with behind-the-scenes routing. Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 13, 2014 Share Posted March 13, 2014 Where did u order them from anyways ? Link to comment Share on other sites More sharing options...
Kovoet Posted March 13, 2014 Author Share Posted March 13, 2014 Use the combs further back to the point where they can be hidden behind the mobo tray. I understand these are the fabric-type sleeves, and they're not rigid, but I know you can make it look well organized. I need to get me some of those in the future to help with behind-the-scenes routing. Thanks will give that a bash. Where did u order them from anyways ? Ordered them from specialtech UK Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 16, 2014 Share Posted March 16, 2014 (edited) Well went a little nuts with some vinyl last night. Think it looks good took me forever. It's not perfect but i think i did a decent job for my first time trying it. http://i60.tinypic.com/25zl1sp.jpg http://i60.tinypic.com/51o7mg.jpg I especially like the hard drive it was an eyesore for sure. Prob going to make a beauty plate for over the hot swaps with some plexi and vinyl. Must of been an idiot and thrown all my plexi in garbage when I moved cuz i can't seam to find any... Edited March 16, 2014 by HOODedAssault Link to comment Share on other sites More sharing options...
wytnyt Posted March 16, 2014 Share Posted March 16, 2014 Well went a little nuts with some vinyl last night. Think it looks good took me forever. It's not perfect but i think i did a decent job for my first time trying it. I especially like the hard drive it was an eyesore for sure. Prob going to make a beauty plate for over the hot swaps with some plexi and vinyl. Must of been an idiot and thrown all my plexi in garbage when I moved cuz i can't seam to find any... yep looks pretty good,i knew there was a darkside to you,,,;): have you tried heat shaping it? Link to comment Share on other sites More sharing options...
HOODedAssault Posted March 16, 2014 Share Posted March 16, 2014 I didn't bother heating it up as I wasn't going around any corners or anything. I didn't want to deform any of those little squares. I'll have to use some heat for the beauty plate I want to make. No time left for it this weekend tho. Time to game. Link to comment Share on other sites More sharing options...
Kovoet Posted March 30, 2014 Author Share Posted March 30, 2014 (edited) Right I added a sharkoon fan and a couple of cables redone. Got rid of my Creative Soundblaster Z as I did not like the light and put in the reconn3d with a modified backplate from E22. This is the final update. Got a spare 7970 Matrix plat but the games I p[lay I do not need to go crossfire. The BHD and joint operations could almost be played with any old laptop. This is now final and thinking about doing a watercool version next maybe in a white 540 case. One for the Mrs. http://imagizer.imageshack.us/v2/1024x768q90/46/u6zs.jpg http://imagizer.imageshack.us/v2/1024x768q90/69/bhxn.jpg http://imagizer.imageshack.us/v2/1024x768q90/28/59un.jpg http://imagizer.imageshack.us/v2/1024x768q90/809/obgc.jpg http://imagizer.imageshack.us/v2/1024x768q90/35/x78i.jpg http://imagizer.imageshack.us/v2/1024x768q90/829/vqqk.jpg http://imagizer.imageshack.us/v2/1024x768q90/541/nutg.jpg http://imagizer.imageshack.us/v2/1024x768q90/716/72zl.jpg http://imagizer.imageshack.us/v2/1024x768q90/20/8rnb.jpg Edited April 4, 2014 by Kovoet Link to comment Share on other sites More sharing options...
Kovoet Posted March 31, 2014 Author Share Posted March 31, 2014 hi before i post my build pics, i want to add some vinyl for the pimp-de-grace but i have a few questions, 1- at the back of the case, did u lay the vinyl down them cut the holes from the back of the case? 2- what did u do with the brackets that support the drive sleds? cut them out, hammer then down, or bend them out fo the way? ty for the help 1.) Laid the vinyl down then used a heat gun which helped as it was easier to cut. When you use the heat you will see exactly where it has to be cut out. 2.) Brackets I cut out with a dremmel which made life easier. http://imagizer.imageshack.us/v2/1024x768q90/593/flis.jpg Link to comment Share on other sites More sharing options...
Blufkip Posted April 5, 2014 Share Posted April 5, 2014 Hello All, Finally got my build finished! Including: -Intel i7-4770K (@4.0Ghz) -Corsair H105 (with 2x SP120 perf. fans in pull) -Corsair Dominator 1866Mhz (2x4gb) -Corsair Ax860i -Msi Mpower Max Ac -Msi Geforce Gtx 780 Lightning -Samsung 840 series 250gb ssd -&(2 old Hdd's) -LG cd/dvd rw drive -Sentry mesh fancontroller -3x AF120 quiet & 1x AF140 -&some custom dustfilters on top &back -2x Alchemy 30cm white leds oh yeah.. I also used the Corsair carbide 540 air case in case someone asks:p Below some pics, http://i61.tinypic.com/250t9js.jpg http://i57.tinypic.com/k2ybl4.jpg http://i61.tinypic.com/2mo35ty.jpg Greets! 1 Link to comment Share on other sites More sharing options...
Kovoet Posted April 5, 2014 Author Share Posted April 5, 2014 Very clean and tidy. Nice 1 Link to comment Share on other sites More sharing options...
zupernico Posted April 9, 2014 Share Posted April 9, 2014 Hi guys, I present my new project with rigid tube. This is my rig with 540 corsair air. Some pictures..... http://imageshack.com/a/img571/4904/75xs.jpg It´s blue, very very blue... http://imageshack.com/a/img845/7631/sceb.jpg http://imageshack.com/a/img850/9136/58hk.jpg http://imageshack.com/a/img203/3544/c3a8.jpg A look inside http://imageshack.com/a/img819/129/a7xe.jpg http://imageshack.com/a/img849/7595/rwi0.jpg http://imageshack.com/a/img843/3568/kusy8.jpg http://imageshack.com/a/img845/3870/j2it.jpg http://imageshack.com/a/img856/6672/jveh.jpg Playing with lights ... http://imageshack.com/a/img833/7728/i10n.jpg http://imageshack.com/a/img845/7416/jpd4.jpg http://imageshack.com/a/img513/6584/ybei.jpg http://imageshack.com/a/img594/2603/mx94.jpg http://imageshack.com/a/img853/1667/7ran.jpg http://imageshack.com/a/img822/9381/3ob9.jpg http://imageshack.com/a/img713/7749/nhn7.jpg I made a backplate with light, but not seen much. Hope you like the rig. Link to comment Share on other sites More sharing options...
jameyscott Posted April 10, 2014 Share Posted April 10, 2014 I've been meaning to do something awesome with my rig for awhile, and the contest sparked me redoing my rig. Let me know what you think. :thumb: Link to comment Share on other sites More sharing options...
wytnyt Posted April 18, 2014 Share Posted April 18, 2014 well im finished my 540 switchout, and after a week or two of runnign it through its paces, i decided it can finally get some air time ill try to get some really clear pics of the inside outside and back in the next few days, but here are 2 to start :D as soon as i can get some decent light outside, ill be getting some detailed pics pce you may want to resize future pics that fit on the screen Link to comment Share on other sites More sharing options...
JerBeware Posted April 20, 2014 Share Posted April 20, 2014 Hey all - I recently decided to take the plunge on a 540 Air and also picked up an H100i - waiting on the 540 Air to finish shipping at this point. Just curious as I've watched multiple videos and browsed quite a few pictures, etc. on the system. One thing I can't seem to figure out is why when using the default fans (or 2 custom fans) with the H100i in this case, that some individuals put the fans below the radiator and some mount them on the top of the radiator. Is there any reasoning behind this if I'm using the default H100i and the 540 Air (no extra fans, no custom fans for the color effects, etc. at this point)? Personally, I think it looks cleaner with the fans mounted on top of the radiator, but just curious if there's a performance difference or something else I'm missing - as when looking at most of the pictures the general system setup looks identical (e.g. I can't find a reason for mounting one way vs. the other) aside from the fan configuration with the radiator. Thanks :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now