Azraeluk Posted November 13, 2005 Share Posted November 13, 2005 Just built an new machine Asus A8N-SLI (Latest BIOS flashed this morning) AMD 64x2 3800 (Manchester Core) 1 GB Cosair (VS1GBKIT400) XFX Nvidia 7800GT Been having a few problems with it and blue screens not quite sure as to the solution, dropped my memory to run in single channel and machine run solid, dual channel seems to be the issue, according to Corsair the memory should run in my mobo but im a little confused over what timings I should set it to in bios or it should autodetect to. Can anyone shed anylight on this? Also If I was to purchase another gig of ram (same kit VS1GBKIT400) would it run dual channel in my mobo, according to Asus it would, but thought I would check on here. Ta in advance for your help. Link to comment Share on other sites More sharing options...
Azraeluk Posted November 15, 2005 Author Share Posted November 15, 2005 Bump for info required. Link to comment Share on other sites More sharing options...
Wired Posted November 15, 2005 Share Posted November 15, 2005 Only the Cas (2.5) is meant to be set manually. 2.75 v for the memory. Link to comment Share on other sites More sharing options...
Azraeluk Posted November 15, 2005 Author Share Posted November 15, 2005 ta muchly so should i be able to run 2gb of it in dual channel (4x512mb) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted November 15, 2005 Corsair Employee Share Posted November 15, 2005 With the MB you have listed you might be limited to DDR333 at 2T command rate with 4 modules. It would be best to use 2 1.0 Gig modules with this MB for best performance like Twinx2048-3200C2. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.