The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cases

Notices

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 10-12-2017, 04:03 PM
gaz4399 gaz4399 is offline
Registered User
 
Join Date: Oct 2017
Posts: 2
POST ID # = 923089
gaz4399 Reputation: 10
Default 760T 280mm rad push/pull

Hello, new member here

I have a question which i cannot find an answer for on the forums, so here it goes

I have a 760t and would like to fit a 280mm rad to the front panel with 4x 140mm fans in a push pull configuration. Can this be done by removing the front hard drive cage?

I plan on fitting the H115i which has a 140x312x26mm rad. slighly shorter than the H110i at 140x322x27mm.

It will be tight but ive measured the height of the front clearance to be around 330mm

Any info would be greatly appreciated before i spend some cash

cheers
Reply With Quote


  #2  
Old 10-13-2017, 12:48 PM
Greybeard's Avatar
Greybeard Greybeard is offline
Corsair Employee
 
Join Date: Feb 2012
Location: Corsair HQ
Posts: 1,070
POST ID # = 923150
Greybeard Reputation: 10
Default

Welcome!

Yes, you can fit a 280 rad in the front. You're right its a tight fit, but it's doable. Just remove the drive cage to clear that space.
Reply With Quote


  #3  
Old 10-14-2017, 01:14 PM
gaz4399 gaz4399 is offline
Registered User
 
Join Date: Oct 2017
Posts: 2
POST ID # = 923265
gaz4399 Reputation: 10
Default

Quote:
Originally Posted by Greybeard View Post
Welcome!

Yes, you can fit a 280 rad in the front. You're right its a tight fit, but it's doable. Just remove the drive cage to clear that space.
Thanks for the prompt response


May I also ask if you know what the length of the hoses are from the radiator to the pump? Also does the h100i & h115i have the same length hoses?

I would just like to confirm that the hoses will reach before I purchase the cooler.

Regards
Reply With Quote


  #4  
Old 10-14-2017, 04:50 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 3,949
POST ID # = 923284
c-attack Reputation: 56
Default

Both should be 11 1/2 inches or ~300mm. Are you having coolant temperature issues with your set-up now? I ask because you are unlikely to see any kind of large gain moving from the top the front and push-pull. It could end up being worse depending on your hardware. Do you have a big watt Ti GPU heating up the case?
Reply With Quote


Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.