Roxel Posted November 21, 2018 Share Posted November 21, 2018 Finished putting together 6 LL fans, 3 SD fans, with a commander pro. Have my lighting node hooked up to the com pro, and connected to power but isn’t being recognized.. I know it’s got power because one of the led strips has on green light on. Link to comment Share on other sites More sharing options...
DevBiker Posted November 21, 2018 Share Posted November 21, 2018 Finished putting together 6 LL fans, 3 SD fans, with a commander pro. Have my lighting node hooked up to the com pro, and connected to power but isn’t being recognized.. I know it’s got power because one of the led strips has on green light on. That green light isn't an indication that it has proper power. Check the channel configuration - make sure that it's correct. Also, do you have any adapters (molex to sata, in particular) in the chain? Link to comment Share on other sites More sharing options...
Roxel Posted November 21, 2018 Author Share Posted November 21, 2018 No adapters, I do have my cpu pump, and 2 rgb hubs on the same string of power cable.. Link to comment Share on other sites More sharing options...
DevBiker Posted November 21, 2018 Share Posted November 21, 2018 Double check that the USB cable is hooked up correctly - it's really easy to have it off-by-one-pin. Also, as a trouble shooting step, you can take a standard micro USB cable and route it to a rear IO shield USB port - to see if it gets picked up then. Link to comment Share on other sites More sharing options...
Roxel Posted November 21, 2018 Author Share Posted November 21, 2018 Had done that already.., it’s good Link to comment Share on other sites More sharing options...
Roxel Posted November 21, 2018 Author Share Posted November 21, 2018 I’ll try the micro usb when I get home from work Link to comment Share on other sites More sharing options...
DevBiker Posted November 21, 2018 Share Posted November 21, 2018 I’ll try the micro usb when I get home from work Sorry ... make that miniUSB. The larger of the small connections. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.