Fish1996 Posted July 15, 2017 Share Posted July 15, 2017 Heya, I'm about to mod my case, but i have some questions about this process: 1. I'm about to get 3xML-120-Black and 3xML-140-WhiteLED, I noticed that in 1000RPM the ML140, and in 1200RPM the ML120 will be NOISELESS!, I wanted to ask for the voltage for 1000RPM in ML140 and the voltage for 1200RPM in ML120. 2. As you see my case is corsair 780T and I want to buy the Corsair H115i, dose it fits in this case? the tech specs does'nt say so. 3.I want to water cool my 980Ti with the HG10 n980 - dose it fits with my GPU? the tech specs does'nt say so. 4.I want to know if you guys know where can I find a PSU shroud. 5.Dose H80iV2 and 2 more ML120 will fit in the front of the case? Thanks! Link to comment Share on other sites More sharing options...
screwtech02 Posted July 15, 2017 Share Posted July 15, 2017 http://www.coldzero.eu/416-corsair-780t Little pricey, but appears to be top notch mod parts. Plan on getting the motherboard tray cover for my case, will make my own PS cover. Link to comment Share on other sites More sharing options...
Corsair Blake Posted July 17, 2017 Share Posted July 17, 2017 1. I'm about to get 3xML-120-Black and 3xML-140-WhiteLED, I noticed that in 1000RPM the ML140, and in 1200RPM the ML120 will be NOISELESS!, I wanted to ask for the voltage for 1000RPM in ML140 and the voltage for 1200RPM in ML120. - These are PWM fans. Use a PWM controller like the COMMANDER PRO to set the RPMs, don't use voltage for these fans. Most modern motherboards are capable of PWM control. 2. As you see my case is corsair 780T and I want to buy the Corsair H115i, dose it fits in this case? the tech specs does'nt say so. - The H115i will most definitely fit in the 780T up top. You can place your two ML140s onto it. 3.I want to water cool my 980Ti with the HG10 n980 - dose it fits with my GPU? the tech specs does'nt say so. - Yes, the N980 fits on the 980 Ti, however you'll need a cooler with longer tubes like the H50 if you want to place it in the front. 4.I want to know if you guys know where can I find a PSU shroud. - Post above this. 5.Dose H80iV2 and 2 more ML120 will fit in the front of the case? - If you plan to install the H80i V2 onto the N980 bracket, it will not be long enough to reach the front. The tubing is a bit short. To answer your question, yes it will fit. Link to comment Share on other sites More sharing options...
Fish1996 Posted July 19, 2017 Author Share Posted July 19, 2017 GREAT!!! Thank you For answering Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.