CORSAIR Obsidian Series 1000D Now Available!

[astex1051]

I was so close to pulling the trigger and buying this case. I do not mind that the "curved" glass is not on the final product. The "curved" sections always looked more bent than curved to me. Either way, I have been planning a dual system build for quite some time and I was very excited when Corasir revealed the Project Slate. I have to say that I am quite disappointed and confused that this was released as an Obsidian series case AND is being marketed as the ultimate RGB super case.

Traditionally, the Obsidian series cases are well made and functional black boxes which is fine. What is frustrating with this case is that the black interior (and all other parts) absorb most of the light that is given off by any LEDs. If I was able to purchase a white version of this case, I would do so in a heartbeat. With a white interior, light is free to bounce around and bring the entire interior of the case to life.

I thought about buying one of these cases and powder coating it myself but I still would not be able to change the color of the molded plastic. I am still waiting for someone to make a gorgeous, white case with all the bells and whistles.

[zeroesp]

Well.... that piece of metal needed to be modified as it didn't hold the radiator directly on it unless I putter push pull on it, which I wasn't going to do on a quad 480mm. anyway, after four hours of taking some metal out, this is the result. (WIP)
With no extra RGB, no a huge fan of it.

[Kaves]

Originally Posted by astex1051

The "curved" sections always looked more bent than curved to me. I have to say that I am quite disappointed and confused that this was released as an Obsidian series case AND is being marketed as the ultimate RGB super case. What is frustrating with this case is that the black interior (and all other parts) absorb most of the light that is given off by any LEDs. If I was able to purchase a white version of this case, I would do so in a heartbeat. With a white interior, light is free to bounce around and bring the entire interior of the case to life.

No case is going to be perfect. Some folks have to drill holes, cut away areas to solve clearance issues, etc. The question is, what are you willing to compromise in order to make your purchase? If one has the budget to purchase the 1000D and all the potential hardware to fill it up, then I'd say powder coating it white could be a cool option that would make your case even more unique if a white version never becomes available.

[LuckyDuck69]

I'm curious to know if the H150i Cooler tubes will reach both the main Mobo and the MiniITX mobo if someone mounted two of them side by side on the front

DERP: The answer is NO.

[Stan116]

The 1000D comes with the 8 x 120 fan tray, at least mine did,so why do you guys need to order them ?

Thanks

[Zotty]

Originally Posted by LuckyDuck69

I'm curious to know if the H150i Cooler tubes will reach both the main Mobo and the MiniITX mobo if someone mounted two of them side by side on the front

DERP: The answer is YES, apparently. http://forum.corsair.com/v3/showthread.php?t=179099

it's going to be tight imho.....

[LuckyDuck69]

Originally Posted by Zotty

it's going to be tight imho.....

Well.. it doesn't reach. Even with the hoses completely straightened out it's about 3 inches too short.

SO.. just in case anyone else is thinking what I was thinking, here's the deal. I bought the H150i Pro and the H100i Pro. I bought the quad 120mm fan tray for the case and planned on mounting the H150i at the top. Then I was going to mount the H100i in the front - if that didn't reach, the back.

Disappointment: You can't mount the H100i in the front because it doesn't reach. You also cannot mount it on the back because the fan tray rails prevent it. So if you want to use an AIO for the second MiniITX system, you're only option is to use the H60 single 120mm AIO and mount it on the back. Which is kind of a bummer considering the size of the case.

I hope this helps someone else who is thinking of doing a dual system build with two AIO coolers. I have an H100i sitting here now that I'll have to find a home for. Overall I have mixed feelings. I understand that the assumption with this case is a custom loop. For sure. But at the same time I assumed that Corsair would have considered their own products while measuring out. Meh, whatever. I love the case regardless.

[Zotty]

Originally Posted by LuckyDuck69

I hope this helps someone else who is thinking of doing a dual system build with two AIO coolers. I have an H100i sitting here now that I'll have to find a home for. Overall I have mixed feelings. I understand that the assumption with this case is a custom loop. For sure. But at the same time I assumed that Corsair would have considered their own products while measuring out. Meh, whatever. I love the case regardless.

Good honest advice right there!!.. thanks for the heads up dude... I prob had those exact plans my self.. Currently doing a 1000d build my self

[MrRog]

Hello @ all

I see in the description that I use a E-ATX Board...
My question is can I use this Board from ASUS (ATX)

ASUS ROG MAXIMUS X HERO (LGA 1151, Intel Z370, ATX)

Thank you for short feedback
Rog

[Zotty]

Yep You can use that board Buddy :)

I have the Asus Z370-f Gaming in mine 1000d.. also an ATX board

[MrRog]

@ Zotty
Thank you
The challenge will be to build water cooling for the first time.
Rog

[Zotty]

Originally Posted by MrRog

@ Zotty
Thank you
The challenge will be to build water cooling for the first time.
Rog

Same.. thats my most looked forward to part of my adventure.. once i have the basic build 'how too's' in my build log thread I should be then starting to Loop it :)

[tearsimmortal]

Thinking about upgrading to this one and keep the 780T case for a back up. What size radiator can you put in the 1000D?

[Zotty]

Originally Posted by alifewelive

Thinking about upgrading to this one and keep the 780T case for a back up. What size radiator can you put in the 1000D?

All of them.... lol...

seriously though.. up to 2 480mm's in the front and the same up top some even have 240mm in the back

[Zotty]

specs page says

Radiator Compatibility 120mm; 140mm; 240mm; 280mm; 360mm; 420mm; 480mm

the front 8 x 120mm tray fits up top also and they sell that tray as a spare.

It comes supplied with 3x140mm tray up top..

Can also purchase a 4x 120mm tray and a 2x200mm tray lol