AustriaPaul Posted April 8, 2018 Share Posted April 8, 2018 After installation of icue my memory (Vengeance RGB), my fans (commander pro) and my powersupply (hx750i) aren't detected. My configuration is as follows. Gigabyte x370 gaming 5 AMD ryzen 1600x 16gb corsair Vengeance 3000 (clocked at 3000) samsung 850evo I had installed Link 4 and it worked normally. Rebooted multiple times none of these devices are shown. Device manager's ok. So this has to be an icue bug. Link to comment Share on other sites More sharing options...
DevBiker Posted April 8, 2018 Share Posted April 8, 2018 Can you show a screen shot of your Home screen in iCue? For the fans, did you configure the lighting channels for the CoPro in iCue? Link to comment Share on other sites More sharing options...
AustriaPaul Posted April 8, 2018 Author Share Posted April 8, 2018 Yes i did, but they aren't displayed (as you see in the sceenshot) Link to comment Share on other sites More sharing options...
DevBiker Posted April 8, 2018 Share Posted April 8, 2018 I'm not sure how to troubleshoot the memory, unfortunately, but let's see if we can walk through some things for the other stuff. First ... are they visible in USBDeView (http://www.nirsoft.net/utils/usb_devices_view.html)? This will let us know if the USB is connected at all. Are you running any other monitoring tools? Do you have Link installed and, if so, which version? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted April 8, 2018 Corsair Employee Share Posted April 8, 2018 I'm not sure how to troubleshoot the memory, unfortunately, but let's see if we can walk through some things for the other stuff. First ... are they visible in USBDeView (http://www.nirsoft.net/utils/usb_devices_view.html)? This will let us know if the USB is connected at all. Are you running any other monitoring tools? Do you have Link installed and, if so, which version? Memory detection works the same way as LINK. If it's not appearing in iCUE, it's possibly that you may have to restart the CLink4 service in Windows Task Manager. Link to comment Share on other sites More sharing options...
AustriaPaul Posted April 9, 2018 Author Share Posted April 9, 2018 I restarted it an i started cue again and now there is a warning saying: failed to start CLink service... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.