Yellowbeard Posted October 26, 2007 Share Posted October 26, 2007 In many cases, users doing troubleshooting have a situation where there is no apparent power to any portion of the system. They often wonder how they can test the PSU to see if it is working. Short of having a proper PSU tester, you can use this method to do a "quick n dirty" test to see if the PSU will spin up and power the 12v rails. UPDATE FOR CORSAIR FANLESS MODE PSUs OCTOBER 2012 This same test is valid with our current PSUs models that utilize a Fanless Mode. Our PSUs with Fanless Mode at low loads do not spin up the fan at low loads. The fan will only spin up at certain loads so the PSU fan will not spin on a simple test like this. Be sure to check the specifications for your PSU to see if it does have a fanless mode. If you are using the "paper clip test" we've listed here, you'll need to connect a component to the PSU that will present a load to the PSU and also allow you to see if it is getting power. A cooling fan is a great option so that you can see that fan spinning. Of course, using a volt meter is the best option. 1. Disconnect the PSU from ALL components in the system. 2. Hook 1 or more cooling fans to the PSU to give it a load. (You can use other items such as HDs but, I recommend using something cheaper and less fragile like a fan) 3. Get a small piece of wire, paper clip, or suitable object and short the 2 pins illustrated below. The voltage present is a very low signaling voltage so no worries of being shocked. The fans should spin right up. This is not a bullet proof test but, it will let you know if your PSU is powering up properly. We have also added a video tutorial demonstrating how to perform this test. [ame=http://www.youtube.com/watch?v=5FWXgQSokF4]PSU TEST VIDEO[/ame] Link to comment Share on other sites More sharing options...
Yellowbeard Posted October 26, 2007 Author Share Posted October 26, 2007 http://www.houseofhelp.com/forums/attachment.php?attachmentid=2816&d=1193431475 Link to comment Share on other sites More sharing options...
optimusplaya Posted December 27, 2007 Share Posted December 27, 2007 This test doesn't ensure the PSU will be able to power a system, it just ensures it has a current? This test works to power a fan on my newly built system but when I try to power the motherboard and accessories- it gives off a soft clicking noise. Link to comment Share on other sites More sharing options...
Acreo Aeneas Posted January 13, 2008 Share Posted January 13, 2008 The test is very basic and is supposed to give a builder an indication as to whether or not the PSU is still functional (working). It does not mean it will handle a particular system's load. Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 25, 2008 Author Share Posted January 25, 2008 Also, keep in mind that some users will do a test like this with no load on the PSU. With no load, the PSU may or may not spin up and if it does, it may emit a clicking sound. This is why you need to put a load on the PSU, like a fan or other device. Link to comment Share on other sites More sharing options...
Brave Posted March 11, 2008 Share Posted March 11, 2008 Just for information... I have a enermax infinity 720 PSU and it won't let you do this. I just beeps at you to tell you its detected a fault. (this can be a pain if you want to leak test your latest and greatest Water block) Link to comment Share on other sites More sharing options...
Samwise Posted April 10, 2008 Share Posted April 10, 2008 This is my first build. I plugged in the Corsair 520 PSU, flipped the switch and nothing happened. I thought it was DOA. I found this thread and conducted the test and sure enough everything is fine. Link to comment Share on other sites More sharing options...
nouze Posted May 19, 2008 Share Posted May 19, 2008 Hello, Just buy the 620HX (but not yet the MB). I want to test it. Before trying with the paperclip : may i use the same pins for an european version of this psu ? Thanks. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 20, 2008 Corsair Employee Share Posted May 20, 2008 Hello, Just buy the 620HX (but not yet the MB). I want to test it. Before trying with the paperclip : may i use the same pins for an european version of this psu ? Thanks. Yes, it is the same. Link to comment Share on other sites More sharing options...
nouze Posted May 21, 2008 Share Posted May 21, 2008 Thanks a lot Still a great customer service since my last visit :biggrin: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 11, 2010 Corsair Employee Share Posted February 11, 2010 NP Please let us know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.