KakitaHan Posted July 23, 2010 Share Posted July 23, 2010 I just built a new rig this month and for the first two weeks i was running it everything was running smoothly, especially my core temps. They were idling around 40 - 41 C. After a bit of research and feeling confident that the H50 can handle a bit of over clocking, I bumped my rig to 3.5ghz and ran prime95 for 4 hours before my pretty blue screen. That is when things started heading downhills. After restarting my computer i saw my temps idling at 46 C and started to steadily rise with no load. I tried repasting three times, adjusting fan for both in take/out take directions, and giving up for the day and trying again to fix the following day. Nothing has been working for the past three days. The fan is running at 1400rpm or close and temps still haven't gone down. :(: Attached is a screenshot.. Please advise! Link to comment Share on other sites More sharing options...
Synthohol Posted July 23, 2010 Share Posted July 23, 2010 the pump is running at half the speed. disable any fan control or needs to be at 100% that will fix it. Link to comment Share on other sites More sharing options...
slimbrady Posted July 24, 2010 Share Posted July 24, 2010 It is a good idea to plug the pump in via molex adapter and just plug a case fan into the cpu connector on the motherboard(to avoid getting mobo errors). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.