MAYA7 Posted March 1, 2012 Share Posted March 1, 2012 Hello, sorry for my English. My config: Mobo: Asrock N68-GE3 Ucc CPU: AMD Athlon II X2 250 3.0 Ghz Windows 7 32 Bit I CMX4GX3M2A1600C9 2X2GB DDR3 Corsair memory in dual channel. I set the bios "Memory Clock" to 800MHz DDR3 1600 and the DRAM Voltage to 1.65V but I had problems with blue screen on windows. So I ran the test with memtest86 + 4.20 ram of the first single, has found 0 errors, then with both the Rams, has found several errors. One other question. How do I configure the "Memory Timing"? http://img13.imageshack.us/img13/3716/20120301004.jpg By maya_7 at 2012-03-01 http://img52.imageshack.us/img52/2706/20120301006.jpg By maya_7 at 2012-03-01 Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 2, 2012 Corsair Employee Share Posted March 2, 2012 That CPU only supports DDR1066 try and set the memory frequency to DDr1066 and make sure that command Rate to 2T and leave the timings at Auto. Link to comment Share on other sites More sharing options...
MAYA7 Posted March 2, 2012 Author Share Posted March 2, 2012 That CPU only supports DDR1066 try and set the memory frequency to DDr1066 and make sure that command Rate to 2T and leave the timings at Auto. ok thanks, now everything works perfectly at 1066 MHz. the voltage 1.48 V or 1.53 V or automatic? I tried a test at 1333 MHz, result 0 errors! why? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 2, 2012 Corsair Employee Share Posted March 2, 2012 I would set the Voltage to what is printed on the models label.' And if it will run at DDR1333 and it is stable then go for it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.