lionessb Posted October 1, 2018 Share Posted October 1, 2018 It was its h110i gt, it was controlled by corsair link, in connection with the detection of the marriage exchanged for h110i the difference between them is no other than the updated firmware, the problem is that on h110i gt the fan speed was equal to the installed at the time the computer was turned on, but on h110i at power-on it keeps on 500rpm, regardless of what speed was put in the corsair link for the last time and it keeps on 500rpm until you upload the corsair link, the last settings you set are applied only when launching corsair links, on h110i gt this was not. I apologize if it is not written correctly, I do not speak English, translated using Google translator Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Jam Posted October 4, 2018 Corsair Employee Share Posted October 4, 2018 Check the fan settings. Make sure it's still looking at your cooler's temp. Link to comment Share on other sites More sharing options...
Corsair Employee Greybeard Posted October 5, 2018 Corsair Employee Share Posted October 5, 2018 You probably have the fans connected to the MB fan ports. If you have them connected on the Motherboard, try connecting your radiators fans to the cooler's pump, that way you can have control over the fan's rpm via Corsair Link. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.