pmgscs Posted December 31, 2012 Share Posted December 31, 2012 So my fans are running at 100% @ 2400 RPMish (up to 4000 in my Bios) and my Corsair link can't see them. It can only see my Geforce fan for some reason? So I'm stuck with a high speed noicy fan... PLEASE HELP! Link to comment Share on other sites More sharing options...
Toasted Posted January 1, 2013 Share Posted January 1, 2013 Is the H80i detected in the dashboard? Have you tried the other fan connector on the H80i? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 7, 2013 Corsair Employee Share Posted January 7, 2013 Try to move the USB connector on a different port on the MB and see if that fixes it. Link to comment Share on other sites More sharing options...
Ripshod Posted January 7, 2013 Share Posted January 7, 2013 Are the LEDs lit up on the pump unit? Link to comment Share on other sites More sharing options...
x2ruff4u Posted January 10, 2013 Share Posted January 10, 2013 I'm also having the same problem. Which also should apply to h100i. I read on another site someone else had this problem. Link below http://www.overclock.net/t/1346825/how-do-i-change-fan-speed-on-h100i I only see the geforce fans and made sure everything is connected properly. I even tried connecting to each usb port and I know they work since I only have 3 of them. I have 4 fans connected, but none of them show? I built many pc's, but this one stumps me. I also tried connecting the 3 wire fan connector to the system port which did not remedy the problem. Any help is appreciated as this might be software related or ???? Thanks! My fan controller is coming in tomorrow anyway, but I like to know how to fix this :!: :!: EDIT: why would my drive temp 4 W say 298[3] ??? Link to comment Share on other sites More sharing options...
Toasted Posted January 10, 2013 Share Posted January 10, 2013 Check Device Manager and see if you see "Unknown device" listed Change the HD device temp to Temp instead of power. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.