RodrigoDRT Posted March 26, 2018 Share Posted March 26, 2018 While i don't have the part no in hand right now, I think it's a quite straightforward question, I have these 2x8 dominator platinum XMS kit, at default they run at 1.650V with XMS enabled, I'm just wondering if it's harmful or would void the warranty if i attempt to run at 1.665V instead for stability purposes, its a 2400mhz kit, but I can't make my overclock stable without lowering it to 1333mhz, wich is a no no. Link to comment Share on other sites More sharing options...
emissary42 Posted March 26, 2018 Share Posted March 26, 2018 Usually a small voltage bump is not an issue as long as temperatures are good and a lot of boards slightly overvolt Vdimm to improve compatibility/stability anyways. Link to comment Share on other sites More sharing options...
RodrigoDRT Posted March 26, 2018 Author Share Posted March 26, 2018 Usually a small voltage bump is not an issue as long as temperatures are good and a lot of boards slightly overvolt Vdimm to improve compatibility/stability anyways. mine is fixed on 1.650 manually on bios, but right beside it, it reads 1.638, ofc I didn't expect it to supply the very exact voltage i've set there, but I can assume its a little under, so maybe pushing 1.665 wouldn't do any harm after... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.