cms239 Posted April 26, 2016 Share Posted April 26, 2016 When I first installed Corsair Link I just had a H100i GTX cooling the CPU. Since then I have added a H110i GT + HG10 to cool my GPU (GTX 980 Ti)and seem to be running into problems. At first Link would not even see the H110 then I noticed a problem in Device Manager so I uninstalled the offending device and scanned for hardware charges. Link then asked me to re-boot and from then on I could see the H110 in Link The H100 is plugged into CPU_OPT header The H110 is plugged into one of the fan headers When I click Options - About, I only see the firmware version for the H100 and not the H110 I am no longer able to control the fan speeds for either the H100 or the H110. The H110 is running at 1500rpm I am unable to change the LED colour on either the H100 or H110 Could the problems be do to incompatibility between the H100 and H110 or can you suggest any other reasons? Bit of and update: When I reboot the PC Link looses the H110 and the ability to change fan speed and LED colour on the H100 resumes Link to comment Share on other sites More sharing options...
red-ray Posted April 26, 2016 Share Posted April 26, 2016 Does Devices and Printers and/or Device Manager report them? Link to comment Share on other sites More sharing options...
cms239 Posted April 26, 2016 Author Share Posted April 26, 2016 Yes and then no when I reboot. I have decided not to use Link for the H110 and am using SpeedFan instead Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.