curtis_debolt Posted November 24, 2005 Share Posted November 24, 2005 Hi, I have 2 sticks of CMX512-3200C2PT running dual channel and they both passed Memtest86 (also passed ran seperate). However randomly during high stress games or applications the computer will either reboot, go to black screen, or blue screen of death saying something about minidump. when the system restarts windows shows a error about minidump and sysdata.xml located in a temp folder. other forums say this is a ram problem. Probelms still accures with either stick ran seperate and Ive tried alternate ram slots, voltages, and manually set timings. Please help Curtis mobo: a8n-sli deluxe Bios: 1015 (latest) CPU: AMD 64 X2 4400+ Dual Core Vid Card: GeForce 7800GT Link to comment Share on other sites More sharing options...
speedykiwi Posted November 24, 2005 Share Posted November 24, 2005 Well I had the same issue and had to swap my ram for some better stuff and now works like a dream.......look at my pc spec and try that ram......beautiful stuff. ;-) Link to comment Share on other sites More sharing options...
Wired Posted November 24, 2005 Share Posted November 24, 2005 speedywiki, he's got the same base memory (yours just has pretty lights). Link to comment Share on other sites More sharing options...
curtis_debolt Posted November 24, 2005 Author Share Posted November 24, 2005 I have also noticed in Bios that the ram does not auto detect to the nice low latency that it should have. Auto detects as fallows: Memclock index value 400Mhz CAS# latency (Tcl) 3 Min RAS# active time (Tras) 8T RAS# to CAS# delay (Trcd) 3T Row precharge Time (Trp) 3T Row cycle time (Trc) 12T Row refresh cyc time (Trfc) 14T read to write time 5T write recovery time 3T 1T/2T memory timing 2T Link to comment Share on other sites More sharing options...
Wired Posted November 24, 2005 Share Posted November 24, 2005 It's not supposed to automatically go to 2-3-3-6, you'll need to change that. Make sure the mem voltage is @ 2.75 appx volts (max is 2.90). Link to comment Share on other sites More sharing options...
Garvin Posted November 25, 2005 Share Posted November 25, 2005 That's- TCL-2.0 TRCD-3 TRP-3 TRAS-6 vdimm for my xl's on that board runs fine at 2.7 volts or 2.8volts. Command Rate for two sticks, one gig, should be 1T. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.