Project "CORSAIR 760T Black & White"

Hi everyone and welcome to my new project. :biggrin:

After the last experience on a Desk ( Dragon Desk), I decided to modding a case, this time ... especially a Corsair Graphite 760T V2 - black / white

A short complete description of the entire project and job accounting.

Ago if you wish, you can also follow me on my Facebook page:

https://www.facebook.com/GasMod-267934856887732/

http://i65.tinypic.com/2zgas0k.jpg

Motherboard: UNDECIDED

CPU: Intel i7 6700K

Memory: Corsair Platinium DDR4 3000 32Gb

GPU: Asus Strix GTX 970

PSU: Corsair HX 850i

SSD: 2 Corsair Neutron Series XT 480GB

http://i67.tinypic.com/r8cqdi.jpg

CPU Block: Phobya CPU-Cooler UC-2 LT - Silver Nickel Plexi Edition

GPU Blocks: Bitspower VG-NGTX970ADIIS Acrylic Top With Stainless Panel (Clear)

Radiators: NexXxoS UT60 Full Copper 360mm

Pump: Alphacool VPP655 - single edition

Reservoir: Alphacool Eisbecher D5 250mm Plexi

Tube Fittings: Alphacool

Coolant: Phobya ZuperZero Clear

http://i66.tinypic.com/fara5c.jpg

Case: Corsair Graphite 760T V2 - black/white

Fans: Corsair Air Series SP120 High Performance Edition 120mm

Cables: Corsair sleeved DC Cable Kit, WHITE

Keyboard: Corsair Strafe RGB MX Silent

Mouse: Corsair Gaming Sabre RGB

Lighting: Phobya LED-Flexlight HighDensity 60cm white (72x SMD LED´s)

http://i67.tinypic.com/110j7mh.jpg

Here we are guys, it's time to start editing some part of the Corsair 760T.

So hand Dremel, and flexible. :D:

I start to remove the front part of the dvd. Unfortunately goes brutally cut, because it is not fixed by simple rivets, but it's all a folded block.

http://i65.tinypic.com/vsetmq.jpg

http://i65.tinypic.com/2dqtweb.jpg

http://i63.tinypic.com/1zpo51y.jpg

http://i66.tinypic.com/2usyixy.jpg

Now is the best part of the cuts, after careful measurement..... :D:

I also have to eliminate this part, as the VGA will be placed vertically. :naughty::naughty:

http://i63.tinypic.com/291hxg0.jpg

http://i67.tinypic.com/309oo6f.jpg

http://i66.tinypic.com/35lz0h3.jpg

http://i63.tinypic.com/2u7rosk.jpg

http://i67.tinypic.com/11rg0gp.jpg

http://i63.tinypic.com/149tn2u.jpg

http://i63.tinypic.com/24g6g3l.jpg

http://i63.tinypic.com/2repezp.jpg

http://i68.tinypic.com/301daw5.jpg

http://i68.tinypic.com/50rxv7.jpg

http://i63.tinypic.com/2h367wz.jpg

http://i63.tinypic.com/zuh35x.jpg

http://i64.tinypic.com/2vbmyqw.jpg

http://i65.tinypic.com/2zylnac.jpg

http://i68.tinypic.com/23jptnb.jpg

http://i66.tinypic.com/aorj1v.jpg

http://i65.tinypic.com/vwzd09.jpg

http://i65.tinypic.com/1zq32wk.jpg

http://i64.tinypic.com/2nkm651.jpg

Hi guys, I continue staring and realizing the support to fix the VGA vertical .....

Recovering the "support" of the vga from an old case, and working with an aluminum plate, to fix everything. :D: :D:

http://i67.tinypic.com/10yga6f.jpg

http://i65.tinypic.com/smtwqp.jpg

http://i66.tinypic.com/fz3vcj.jpg

And fixed all the time with the aluminum rivets. :D:

http://i68.tinypic.com/154caqp.jpg

http://i65.tinypic.com/29kqrlw.jpg

Continue, with realize with an aluminum bar, the internal level to securing homes with more and aluminum rivets, and some small allen. :D:

http://i66.tinypic.com/r0rw2t.jpg

http://i65.tinypic.com/fato2x.jpg

http://i66.tinypic.com/nowy1c.jpg

http://i65.tinypic.com/2cnxbsy.jpg

http://i63.tinypic.com/11wbx1s.jpg

http://i64.tinypic.com/b6699c.jpg

............... :D:

This afternoon I began to fix the front aluminum bar, putting it level with the rest of the case. :D:

http://i67.tinypic.com/2j5nngy.jpg

In the lower part will then fissta an aluminum plate, laser cut. :dremel:

http://i67.tinypic.com/4h2wxe.jpg

http://i68.tinypic.com/2d0x9va.jpg

.................. :D:

Hi .... :D:

Today I decided to enter the inside of the radiator, this grid to fix the slats of rad.

You will need some cut, since it is the largest of the radiator.

Some cut with flexible and will be perfect....:laughing::laughing:

http://i63.tinypic.com/qravxs.jpg

http://i66.tinypic.com/w71kkp.jpg

http://i65.tinypic.com/214a03t.jpg

http://i66.tinypic.com/qn319x.jpg

............. :p:

It 's time to discard the plexyglass..... The plate is white, but slightly transparent.

http://i65.tinypic.com/219b2uq.jpg

Now the realization of the depth of the radiator box.

http://i67.tinypic.com/105sit5.jpg

http://i64.tinypic.com/20p2a6b.jpg

Finally try the shelf ....

http://i67.tinypic.com/mw64qp.jpg

http://i64.tinypic.com/2uorozo.jpg

Hi boys .... :D:

Because I have to wait until I arrive the mobo, Today I began to fix the pump and tank on plexy.

I also decided to put the fans inside the Corsair. ;):

I have also connected the radiator using his elbows to 90° of Alphacool, and pierced the Plexiglas to accommodate the bulkhead. ::D:

http://i66.tinypic.com/68fqmt.jpg

http://i64.tinypic.com/986a1c.jpg

http://i67.tinypic.com/fom4hf.jpg

http://i68.tinypic.com/oivsxf.jpg

http://i65.tinypic.com/2zf8uir.jpg

................ :laughing: :laughing: :laughing:

Hi guys. :D:

Meanwhile I had to wait until I arrived a bit of material to continue ......

A few photos of the new WB.

http://i65.tinypic.com/2eaqjo5.jpg

http://i63.tinypic.com/2u8yrnt.jpg

Who immediately mounted on Asus 970 Strix, to have the footprint measures in case. :D:

http://i68.tinypic.com/egcyed.jpg

http://i66.tinypic.com/25fuh6e.jpg

Also during this period I also got the processor that will be used in mod. :D:

http://i68.tinypic.com/9zlopc.jpg

http://i63.tinypic.com/nl4lkn.jpg

Now I must wait until I arrive the motherboard..... ;):

Hi boys :D:

Today I started working the front of the Plexiglas, from 5mm.

And after the necessary measurements, I can start.

http://i67.tinypic.com/dczy3q.jpg

http://i66.tinypic.com/neyuet.jpg

And I start with the cuts. :laughing: :laughing: :laughing: :laughing:

http://i64.tinypic.com/fefnyh.jpg

http://i67.tinypic.com/33omt5t.jpg

http://i63.tinypic.com/2sbo6qg.jpg

And finally here is how: :biggrin:

http://i63.tinypic.com/334t8x3.jpg

............... :D: :D:

Hi boys ... :D: :D:

And finally, after a thousand problems with shipping, and the first motherboard stolen a customs, then finally it came:: :cool: :cool:

Some pictures, and ready to mount processor - ram - wb.

http://i66.tinypic.com/29xc4g4.jpg

http://i64.tinypic.com/aviu5i.jpg

http://i65.tinypic.com/246nlf7.jpg

http://i66.tinypic.com/wmj7gl.jpg

................ :D: :D:

And finally we begin to mount HW. :D: :D: :D: :D: :D:

http://i65.tinypic.com/29dfuja.jpg

http://i64.tinypic.com/o6kync.jpg

http://i64.tinypic.com/3461h7m.jpg

http://i64.tinypic.com/14xji44.jpg

http://i67.tinypic.com/b7jeyu.jpg

http://i65.tinypic.com/qx2rnc.jpg

Today I finally finished all the loop .... and Saturday I can do the first test coverage:: :D::D:

http://i66.tinypic.com/2rc0mev.jpg

http://i65.tinypic.com/2w50q6t.jpg

http://i67.tinypic.com/15ohvt2.jpg

............. :D:

:D: :D:

[ame]

Such an amazing build!

I am planning to do something similar with the psu shroud!

Is it possible to give the length and width of the acrylic pieces you used go hide the psu and cables!

Keep up your awesome work!

Mod completed. :D: :D:

I have done everything possible to complete the hack, but unfortunately I have a problem with Motherboard. :mad:

After the holidays I'll make a RMA to Asus, because the Rams slot ( A1- A2 )do not work

The pc part, and works well, only with 2 ram inserted into slots ( B1 - B2 ).

The liquid cooling system is working perfectly. :D:

and now being in summer the asus support does not respond and just reopen contact them , to have a new functioning motherboard .

Here the final photos of the mod .

http://i68.tinypic.com/2ug14ep.jpg

http://i66.tinypic.com/wtatuf.jpg

http://i64.tinypic.com/23kp4pt.jpg

http://i67.tinypic.com/15rdpuu.jpg

http://i63.tinypic.com/293u1dx.jpg

http://i67.tinypic.com/15wzzg3.jpg

http://i68.tinypic.com/xljgc0.jpg

http://i65.tinypic.com/11bk7eo.jpg

A special thanks goes to Corsair Aquatuning, and Pc -cooling, for their help in the realization of the mod, with their materials. :D: :D: :D:

Nice mod! I would like to see an aquaero instead of the Rheobus.

How is the GPU connected to the motherboard? (on this picture it looks like its unconnected)

I don't get how your water circuit works. Why are there three ports at the flow meter? :confused:

We're finally back. :D:

Replaced the faulty motherboard ( asus ) with a Asrock Z170 Estreme4, and everything works perfectly. :[pouts: :[pouts:

There I post pictures this time final. :D:

http://i64.tinypic.com/2gv2c05.jpg

http://i65.tinypic.com/35iybzq.jpg

http://i66.tinypic.com/2unvm90.jpg

http://i67.tinypic.com/20tktpi.jpg

http://i67.tinypic.com/14bt7bl.jpg

http://i65.tinypic.com/25p22l2.jpg

http://i66.tinypic.com/2d94o6u.jpg

In a few days I will insert on YouTube, my video of the Mod. :laughing: :laughing:

Bad boys, here is my final video Mod. :clap: :clap:

Like, and shares are well accepted. :laughing:

Thank you.

[ame=

http://i63.tinypic.com/2dgpclj.jpg

 

Hi everyone and welcome to my new project. :biggrin:

After the last experience on a Desk ( Dragon Desk), I decided to modding a case, this time ... especially a Corsair Graphite 760T V2 - black / white

 

A short complete description of the entire project and job accounting.

Ago if you wish, you can also follow me on my Facebook page:

https://www.facebook.com/GasMod-267934856887732/

 

 

http://i65.tinypic.com/2zgas0k.jpg

 

 

Motherboard: UNDECIDED

CPU: Intel i7 6700K

Memory: Corsair Platinium DDR4 3000 32Gb

GPU: Asus Strix GTX 970

PSU: Corsair HX 850i

SSD: 2 Corsair Neutron Series XT 480GB

 

 

http://i67.tinypic.com/r8cqdi.jpg

 

 

CPU Block: Phobya CPU-Cooler UC-2 LT - Silver Nickel Plexi Edition

GPU Blocks: Bitspower VG-NGTX970ADIIS Acrylic Top With Stainless Panel (Clear)

Radiators: NexXxoS UT60 Full Copper 360mm

Pump: Alphacool VPP655 - single edition

Reservoir: Alphacool Eisbecher D5 250mm Plexi

Tube Fittings: Alphacool

Coolant: Phobya ZuperZero Clear

 

 

http://i66.tinypic.com/fara5c.jpg

 

 

Case: Corsair Graphite 760T V2 - black/white

Fans: Corsair Air Series SP120 High Performance Edition 120mm

Cables: Corsair sleeved DC Cable Kit, WHITE

Keyboard: Corsair Strafe RGB MX Silent

Mouse: Corsair Gaming Sabre RGB

Lighting: Phobya LED-Flexlight HighDensity 60cm white (72x SMD LED´s)

 

 

http://i67.tinypic.com/110j7mh.jpg

-----------

[ame=

How is the GPU connected to the motherboard? (on this picture it looks like its unconnected)

 

I don't get how your water circuit works. Why are there three ports at the flow meter? :confused:

No answer to my questions? :confused:

How is the GPU connected to the motherboard?

I don't get how your water circuit works. Why are there three ports at the flow meter? :confused:

I'd like to know as well!

Here I am young, and sorry for the delay.

The GPU, and connected with this:

Li-Heat PCI-E Gen 3.0 Ribbon flexible Riser Cable - Black

We are not seen, because it remains in the rear.

https://www.highflow.nl/hardware/videokaarten/li-heat-pci-e-gen-3.0-ribbon-flexible-riser-cable-black.html

The part below the flow meter, It is simply a drain. :D:

https://s15.postimg.org/hyfosqebv/IMG_20161017_185220.jpg