seti Posted July 16, 2004 Share Posted July 16, 2004 I did memory 86 check and it showed that my ram was at 2-4-3-8 I talked to corsair on the phone and they told me it was supposed to be 2-3-3-6 how do i do this exactly please Link to comment Share on other sites More sharing options...
Yellowbeard Posted July 16, 2004 Share Posted July 16, 2004 Look in your manual in the segment regarding bios settings. Then, look for the portion under the ADVANCED section dealing with CHIPSET, manual page 4-18 in mine. Here you will find an option regarding SPD. Highlight this, and select DISABLE. Then, 4 timing parameters will then appear that were previously hidden. Set them, in this order to 2,3,3,6 and also set the burst length to 8. Also, look in the portion regarding Jumperfree Configuration. In this section, manually set your RAM voltage to 2.75v and also set the performance mode to STANDARD. Mike. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.