PC Freezed on the First Step of Windows Setup !!

[batreky]

Updates : Guys I can't Install Windows 7 Enterprise or Ultimate as the PC Freeze on the First Step after the loading Files which is the Language Options So from here No access or Mouse or Keyboard and the PC Stopped !!! Going to Bios and Find the Temps is 38 Degree and my Memory Ram 2133 MHZ and on the bios shown as 1333 Only !!! any Help Please would much appreciated

Some Shots





Waiting for your Replies Guys

[Synthohol]

its showing 1333 because its the default SPD and may not reflect the actual XMP its running at.

why dont you try installing windows with just 4 gig installed @ 1333 then after windows is successfully running shut down and add 4 gig at a time until all 16 gig are in then start to overclock.

[batreky]

Originally Posted by Synthohol

its showing 1333 because its the default SPD and may not reflect the actual XMP its running at.

why dont you try installing windows with just 4 gig installed @ 1333 then after windows is successfully running shut down and add 4 gig at a time until all 16 gig are in then start to overclock.

Updates :

Note : Bios updated to Latest Version 1203 @ P9X79 DELUXE, Still the same Problem!!, Also Remove 3 Rams and let only 1 4GB runs @1333 one time tested Also @ 2133 one time tested for windows Installation and still the Same problem!, Only there are 2 steps not tested until now the Changing the SDD Samsung Drive & Testing the Ram with memtest86+ , So will do that tomorrow morning,

Thanks to all of u guys to show me your Help and suggestions, Will back with any updates...

Edited : Problem Solved cause I was putting the USB of the Microsoft Combo in the Blue Port and not the Black Port in the Back side , just moved it and Installing Now :)