mesh dimensions

[5jefro7]

Can anyone take a quick measurement of the rectangular mesh on the back of the case above the fan mesh? If it's not too much to ask, I'd also like to get the idea of the size of the mesh below the expansion slots

I'm in the process of putting together some air filters & may have to see if I can come up with ones for these openings..hopefully, my case should be here within the next 4 or 5 days

[Raptor-X]

Top Mesh = 6.0" x 2.0"
Bottom Mesh = 4.75" x .75"

Regards,
Raptor

[5jefro7]

thank you, sir

[Raptor-X]

You are welcome. Enjoy your new case. It is a great one.

[5jefro7]

if anyone is contemplating making their own dust filters, I can help out with some of the mesh..got far more than I need... I bought a 3' x 7' roll of solar screen from the local hardware chain (know ANY pc with a fan area of 21 square feet?) and for magnetic strips, I've found this to be about the best deal around:

https://www.promagproducts.com/catal...bndnaj7epfv2s3

the local craft store wants about $1.00/30" & $4.00/10'...now that I know where THEY get it, the ricing isn't so bad