|
|
|||||||
| Register | Forum Rules | Support Ticket System | Members List | Social Groups | Edit System Specs | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
#61
10-21-2008, 01:21 PM
|
||||
|
||||
With two modules yes you should be able to run them at full speed. So get one 4 Gig set of modules for best performance.
__________________
Support accounts and tickets can be created at https://support.corsair.com. 
|
|
#62
10-22-2008, 07:57 PM
|
|||
|
|||
|
Alright, Thanks again. Sorry for being such a n00b.
|
|
#63
10-22-2008, 08:31 PM
|
||||
|
||||
|
The only way to run full speed DDR800 with that MB would be with one of our Twin2x4096-6400C4DHX sets of modules if you cannot get the 4 you have rnning at DDR800 with the settings I have posted IE: 2.1 Volts with the NB/MCH/SPP Voltage set to +.2 Volts. Or try over clocking the CPU with the memory set to DDR667.
__________________
Support accounts and tickets can be created at https://support.corsair.com.
|
|
#64
10-24-2008, 12:53 PM
|
|||
|
|||
|
Alright, I havent tried yet putting my 4 gig in, still waiting for it to arrive. To make sure I get better compatibility im upgrading to xp64. Im hoping that it should run without dropping down to 667, especially since its only 2x2gig sticks.
What is better though? Running 2GBx2 sticks at 800mhz, or running 4x2GB sticks at 667Mhz? I read here a guy upgraded to 8 gig ram but had to drop to 667. Is it worth getting the extra ram and dropping to 667? Im trying to get the best out my pc as I do 3D animation.
|
|
#65
10-30-2008, 12:06 AM
|
|||
|
|||
|
Having the same problem with 4 sticks of TWIN2x4096-6400C5. Vista 64-bit, can't boot with 4 sticks 5-5-5-18 800. Works fine with 2 sticks. Will try to clock RAM @ 667 (is that correct? Same solution as the smaller sticks of RAM?).
UPDATE: Running fine @ 667. Still would like to hit 800. I guess I'll try to push the processor clock to 1280 or so. Last edited by Ranger099; 10-30-2008 at 09:14 AM.
|
|
#66
02-14-2010, 03:05 AM
|
|||
|
|||
|
Hi I need to understand something, when you meant 667 MHZ does it mean the FSB for the Mem or the QDR? I dont understand those 2 differences, I put 1600 for QDR and 800 for Mem and I do sync mode. I need to know those 2 differences please
|
|
#67
02-14-2010, 03:07 AM
|
|||
|
|||
|
P5N-E is running my 4gb of memory at 800 (1:1) unlinked with the E6750 oc to 3.2
My cpu is the C2d 6750 Another thing that I dont udnerstand what is that "C2d 6750" and "E6750" means which setting is that or how do you added up things to 6750? what is that "oc to 3.2" means?
|
|
#68
02-14-2010, 03:39 AM
|
||||
|
||||
|
E6750 isn't a speed, it's a model number of your CPU. OC to 3.2 means he's overclocked his CPU to 3.2 GHz.
Also, your post and your specs have different CPUs.
__________________
No, I don't work for Corsair ...you need to flow like a river... Forum Rules Admin of this forum / webdesignforums.net / Petri's IT Forum / The Corsair Memory Steam Group Founder/Creator/Admin of ZE SECRET PROJECT (Coming Soon)
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Reputation: 10
Linear Mode
