The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 05-22-2019, 05:42 PM
Gazza87 Gazza87 is offline
Registered User
Gazza87's PC Specs
 
Join Date: May 2019
Posts: 1
POST ID # = 1005411
Gazza87 Reputation: 10
Default H100i RGB Platinum CPU FAN error and red LED

Hi All,

I know this issue has been touched on before, however i couldn't find a specific solution relating to the RGB Platinum version.

So, I recently purchased all new parts to build a new PC, upon first start up, I receive the "CPU FAN" error. The CPU FAN is showing as N/A in the bios (ASUS TUF Z390M Pro Gaming Motherboard). The RGB lighting is working on both fans, however the pump lighting stays Red and doesn't alternate colours like the fans do. Is it possible to have a dead pump straight out of the box?

I have double checked all connections and am fairly confident everything is plugged in correctly. 3 Pin connector plugged into the CPU FAN slot etc. The bios shows the CPU temp around 25 deg c and slowly rises by a degree. I have let it reach 70 deg before I turned the computer off.

I don't want to try and install windows incase the temperature keeps rising.

I have read posts that say to set the CPU FAN to 100% or disable speed control in the BIOS but from my understanding this is for an older H100 version that doesn't have a SATA connection??

Any help would be appreciated.

Thanks

Josh
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.