cx5 Posted April 17, 2018 Share Posted April 17, 2018 Hi everyne, just FYI, information sharing/overclock attempt report/update. long story can be read here http://forum.asrock.com/forum_posts.asp?TID=8419&title=3200-success-for-cmk32gx4m2b3000c15-x370-taichi quick report, short version story, 3200 stable at low voltage 1.36v bios 1.38v A-tuning, windows boot much faster than 2933 CL16, i.e. windows 10 circling one round or less. Simultaneous CPUZ stress button on, with youtube running with another video playing + all background software MSI afterburner, teamspeak3, wolf, dropbox, utorrent, AVG, Qsync, etc etc etc, pulling files in and out of external USB3. But didn't play game yet, late night, tired. Dr.Debug temperature readout LED shows 78 celcius at full load, then 57 when idling, While A-tuning says CPU 43 only. May be I should check for new updates. Anyway, screen shots. If anyone has any advice for better timing, welcome to reply, thanks so much in advance. Quick results screen shot here http://www.my-acoustic.com/images/3200%20success%201.36v%20bios%201.38v%20A-tuning%20soc%20auto.PNG On 8th July 2018 found SoC voltage 1.3v helps to run 3200mhz again http://www.my-acoustic.com/images/3200%20soc1.3v%20dram1.44%20vtt0.72v%20low%20time%20edited.png Link to comment Share on other sites More sharing options...
cx5 Posted July 6, 2018 Author Share Posted July 6, 2018 Report update, actually above only stable good for one week then completely failed till today. Has been running 2933 and 3066 with below latest stable for my case. 2933 1.328v reading by A-Tuning software, UEFI setting is 1.32v, with VTT up 0.1V http://www.my-acoustic.com/images/2933-14151515%20with%20ohms%20UEFI4.7.PNG and 3066 1.352v reading by A-Tuning software, UEFI setting is 1.34v, with VTT up 0.1V = 0.71v because actual is 1.35, hence run 0.7v not stable. Must manual correct this. http://www.my-acoustic.com/images/3066%20C16161616%20test.PNG with experience sharing: - http://forum.asrock.com/forum_posts.asp?TID=6264&title=finally-success-3066mhz-on-cmk32gx4m2b3000c15 http://forum.asrock.com/forum_posts.asp?TID=9035&KW=&title=x370-taichi-ram-self-training-first-time-for-me hope this helps users of CMK32GX4M2B3000C15 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.