SisU303 Posted January 30, 2019 Share Posted January 30, 2019 Hi, I need some help... I have the following: Fans: 6x Corsair SP120 RGB LED Led: 9x Corsair Link RGB LightingStrips I also have 2 rgb fan led controllers + 1 lightning node pro hub. Is it possible to connect these things together using 1 node pro or do I need another one? Also the fan led cables are too short, is there extension cables available anywhere? Thanks in advance. SisU Link to comment Share on other sites More sharing options...
SisU303 Posted January 30, 2019 Author Share Posted January 30, 2019 Might add that the goal is to manage everything via software (icue?) not the remote. Link to comment Share on other sites More sharing options...
DevBiker Posted January 30, 2019 Share Posted January 30, 2019 Check out the RGB FAQ at http://forum.corsair.com/v3/showthread.php?t=173880. You'll need two LNPs or a LNP and a Commander Pro. If you want to build your own extension cables, you can check out http://forum.corsair.com/v3/showthread.php?t=174759. Or if you just want to buy them, you can get them here: https://www.ebay.com/str/piratedogtech. Link to comment Share on other sites More sharing options...
SisU303 Posted January 31, 2019 Author Share Posted January 31, 2019 Hi DevBiker and thanks for your reply. I suspected this but had hopes that I didn't need anything else. Anyway, is it possible to just buy the lnp without the LEDs? I already have 16 of these because I've bought the Expansion kits... Thanks in advance. /SisU Link to comment Share on other sites More sharing options...
DevBiker Posted January 31, 2019 Share Posted January 31, 2019 I've not seen the LNP for sale on its own from any reseller. You might be able to find someone selling a spare on eBay but, outside of that, that's it. Link to comment Share on other sites More sharing options...
SisU303 Posted January 31, 2019 Author Share Posted January 31, 2019 Thanks again. I ordered a new package with a LNP and also ordered the Commander Pro. Now I'll have 22 LEDs and 6 Fans to play around with... It's for a wallmounted custom build that's 80cm x 80cm so I suppose I can find use for all this. :P /SisU Link to comment Share on other sites More sharing options...
SisU303 Posted February 11, 2019 Author Share Posted February 11, 2019 So I encountered new issues. I have the following connected. 3fans -> Fan LED hub1 - > CoPro (LED channel 1) 3fans -> Fan LED hub2 -> CoPro (LED channel 2) No issues with the above 2. LNP1 -> CoPro (USB) Channel1 has 6 strips connected to it, only 2 is working. Channel 2 has 3 strips connected and no problem here. SO it's the LNP channel 1 that only works for 2 of the 6 strips. I have changed the amount of strips in the lightning options to 6 but it's not doing anything. I have a second LNP that I don't use at the moment, At first I connected the 2 fan hubs to this and from the to coPro but the LNP didn't even appear in icue. Any suggestions to why the 4 strips not working? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.